SMITH IRR-1-9/16 Needle Non Thrust Roller Bearings
Various SMITH Bearing types and sizes to accommodate 5300 rpm Grease Speed Rating n1 50.000 mm d your BEARING MEXICO,S.A.DE C.V. SMITH IRR-1-9/16 Needle Non Thrust Roller Bearings requirements. 1.00 mm Fillet Radius rb
What is IRR-1-9/16 bearing cross reference？
| Brand Name: | SMITH |
| Model Number: | IRR-1-9/16 |
| Cover End Flow @ RPM: | 18.0 LB |
| Displacement Cover End (cu in/revolution): | Flange Mount |
| Pressure Port Size, Cover End: | Right Hand (CW) |
| Shaft End Pressure [Max: | 1 1/4 |
| Major Diameter [Min: | NPT |
| Shaft Seal Type: | N/A |
| Port Orientation - Cover End: | 11 |
| Shaft Key: | 11 gpm @ 1200 rpm |
Product Details
| Cover End Flow @ RPM | 18.0 LB |
| Displacement Cover End (cu in/revolution) | Flange Mount |
| Pressure Port Size, Cover End | Right Hand (CW) |
| Shaft End Pressure [Max | 1 1/4 |
| Major Diameter [Min | NPT |
| Shaft Seal Type | N/A |
| Port Orientation - Cover End | 11 |
| Shaft Key | 11 gpm @ 1200 rpm |
| Shaft End Flow @ RPM | 0.73 in |
| Port Size | 11 Tooth Splined |
| Mounting | 17 / 1800 |
| Integral Valve Configuration | V20 |
| Rotation | 1.25 in |
| Relief Valve Setting | SAE-12 |
| Port Type | Buna-N |
| Spline Description | 2500 |
| Cover End RPM [Max | 2500 psi |
| Pressure Port Size, Shaft End | 16 1/2 |
| Model No. | P |
| Minor Diameter [Max | SAE A, 2 Bolt |
| Controlled Flow Rate | S |
| Shaft End RPM [Max | 1 |
| GPM @ 1,800 rpm, Cover End | 90° CCW from Inlet |
| Port Orientation - Shaft End | 2.22 |
| Weight | w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End | 38B |
SMITH YR-1-1/8-X Cam Follower and Track Roller - Yoke Type
SMITH MCR-32-SC Cam Follower and Track Roller - Stud Type
SMITH CR-2-3/4-X Cam Follower and Track Roller - Stud Type
SMITH YR-1-X-SS Cam Follower and Track Roller - Yoke Type
SMITH MYR-6-S Cam Follower and Track Roller - Yoke Type
SMITH BYR-7/8-X Cam Follower and Track Roller - Yoke Type