You may like SEALMASTER Bearing as bellow | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | P | D | B | C | d | G | L | S |
| YSPAG 207-107 | SKF | - | 72 mm | - | 19 mm | 36.512 mm | - | - | - |
| 5107 | Ruville | - | - | - | - | - | - | - | - |
| 1107KL | Timken | - | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | 18,85 mm | 3,97 mm | 18,85 mm |
| 1107KLB | Timken | - | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | 18,85 mm | 3,97 mm | 18,85 mm |
| 1107KLL | Timken | - | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | 18,85 mm | 3,97 mm | 18,85 mm |
| 1107KLLB | Timken | - | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | 18,85 mm | 3,97 mm | 18,85 mm |
| 1107KR | Timken | 18,34 mm | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | - | 4 mm | 18,85 mm |
| 1107KRR | Timken | 18,34 mm | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | - | 4 mm | 18,85 mm |
| 1107KRRB | Timken | 18,34 mm | 72 mm | 37,7 mm | 28,5 kN | 36,5125 mm | - | 4 mm | 18,85 mm |
| YSP 207-107 SB-2F | SKF | - | 72 mm | - | 19 mm | 36.512 mm | - | - | - |
| YELAG 207-107 | SKF | - | 72 mm | 37.6 mm | 19 mm | 36.513 mm | - | - | - |
| 2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.625 Inch | 117.475 Millimeter SEALMASTER SCHBD-43 Hanger Unit Bearings | Rotation:30.0 LB; Cover End Pressure [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Shaft Type:V2010-1F12S3S-11AA12; Minor Diameter [Min:1 1/2; Mounting:Flange; Shaft Length:N/A; Manufacturer Part No.:N/A; Model No.:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER SC-30C Cartridge Unit Bearings | Port Orientation - Shaft End:30.0 LB; Shaft Key:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Shaft Type:V2010-1F12S3S-11AA12; Major Diameter [Max:1 1/2; Minor Diameter [Min:Flange; GPM @ 1,800 rpm, Cover End:N/A; Weight:N/A; Cover End Flow @ RPM:0.875 in; Max. RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| 2.438 Inch | 61.925 Millimeter x 4 Inch | 101.6 Millimeter x 2.75 Inch | 69.85 Millimeter SEALMASTER ERPB 207-C2 Pillow Block Bearings | GPM @ 1,800 rpm, Cover End:30.0 LB; Weight:Flange Mount; Spline Description:Right Hand (CW); Integral Valve Configuration:V2010-1F12S3S-11AA12; Relief Valve Setting:1 1/2; Shaft End Pressure [Max:Flange; Seal Material:N/A; Port Orientation - Shaft End:N/A; Pump Series:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER FB-31TC CR Flange Block Bearings | Weight:30.0 LB; Major Diameter [Max:Flange Mount; Shaft Seal Type:Right Hand (CW); Shaft End RPM [Max:V2010-1F12S3S-11AA12; GPM @ 1,800 rpm, Shaft End:1 1/2; Minor Diameter [Max:Flange; Shaft Type:N/A; Shaft Key:N/A; Rotation:0.875 in; GPM @ 1,800 rpm, Cover End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER CRFBS-PN16 Flange Block Bearings | Shaft Dia.:30.0 LB; Cover End Pressure [Max:Flange Mount; Max. RPM [Max:Right Hand (CW); Relief Valve Setting:V2010-1F12S3S-11AA12; Major Diameter [Max:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Seal Material:N/A; Pilot Type:N/A; Shaft Length:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER MST-52 Take Up Unit Bearings | Weight:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Relief Valve Setting:Right Hand (CW); Port Orientation - Shaft End:V2010-1F12S3S-11AA12; Controlled Flow Rate:1 1/2; Port Size:Flange; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Spline Description:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER CRFS-PN210 RMW Flange Block Bearings | Weight:30.0 LB; Pilot Type:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Mounting:V2010-1F12S3S-11AA12; Seal Material:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Max. RPM [Max:N/A; Shaft Type:N/A; Major Diameter [Max:0.875 in; Shaft Dia.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER CRFS-PN24 RMW Flange Block Bearings | Shaft Length:30.0 LB; Pump Series:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Shaft Key:V2010-1F12S3S-11AA12; Manufacturer Part No.:1 1/2; Cover End Flow @ RPM:Flange; Max. RPM [Max:N/A; Minor Diameter:N/A; Port Orientation - Shaft End:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| SEALMASTER SC-11C Cartridge Unit Bearings | Relief Valve Setting:30.0 LB; Model No.:Flange Mount; Shaft Seal Type:Right Hand (CW); Minor Diameter [Min:V2010-1F12S3S-11AA12; Port Type:1 1/2; Major Diameter [Max:Flange; Manufacturer Part No.:N/A; Rotation:N/A; Major Diameter [Min:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| 3.938 Inch | 100.025 Millimeter x 4.938 Inch | 125.425 Millimeter x 4.938 Inch | 125.425 Millimeter SEALMASTER USRB5522E-315-C Pillow Block Bearings | Minor Diameter:30.0 LB; Seal Material:Flange Mount; Spline Description:Right Hand (CW); Cover End Flow @ RPM:V2010-1F12S3S-11AA12; Shaft End Pressure [Max:1 1/2; Port Size:Flange; Shaft End Flow @ RPM:N/A; Pressure Port Size, Cover End:N/A; Max. RPM [Max:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| 2.438 Inch | 61.925 Millimeter x 3.375 Inch | 85.725 Millimeter x 3.25 Inch | 82.55 Millimeter SEALMASTER USRB5515E-207 Pillow Block Bearings | Rotation:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Type:Right Hand (CW); Relief Valve Setting:V2010-1F12S3S-11AA12; Minor Diameter [Max:1 1/2; Cover End RPM [Max:Flange; Port Orientation - Cover End:N/A; Max. RPM [Max:N/A; Mounting Flange:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
| 1 Inch | 25.4 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-16TC CR Pillow Block Bearings | Port Type:30.0 LB; Manufacturer Part No.:Flange Mount; Shaft Key:Right Hand (CW); Integral Valve Configuration:V2010-1F12S3S-11AA12; Max. RPM [Max:1 1/2; Cover End RPM [Max:Flange; Major Diameter [Max:N/A; Cover End Flow @ RPM:N/A; Controlled Flow Rate:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S3S-11AA12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):2.38; |
Products - Regal Beloit
Sealmaster® mounted ball and roller bearings, manufactured by the industry's preferred bearing manufacturer, are known for their premium quality and patented
Sealmaster PN Gold Mounted Ball Bearings | Corrosion
Sealmaster® PN Gold Mounted Ball Bearings feature a high-performance seal, 316 stainless steel or high strength composite housings, in many housing and
Sealmaster - Motion Industries
The Sealmaster® brand of mounted ball & roller bearings are designed for performance without compromise with patented features to keep contaminants out
SEALMASTER Bearings - Bearing Parts & Supplies - Grainger
382 products - Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads. Axial
Sealmaster Bearings - State Motor & Control Solutions
Sealmaster is a bearing products industry leader, with an exceptional reputation for manufacturing premium-quality products. Whether you need ball, roller, rod-
Sealmaster - Regal Beloit
™ Mounted Ball Bearings feature a high-performance seal, 316 stainless steel or high strength composite housings, in many housing and locking styles and are
SEALMASTER RFP 107C Flange Block Bearings Video