REXNORD ZT95215B Take Up Unit Bearings
QuestionREXNORD ZT95215B Take Up Unit Bearings ? Find what you 3510 lbf Basic Dynamic Radial Load Rating need BEARING MEXICO,S.A.DE C.V. faster 1.5625 in Width A by entering your REXNORD Bearing information .
What is ZT95215B bearing cross reference?
Brand Name: | REXNORD |
Model Number: | ZT95215B |
GPM @ 1,800 rpm, Cover End: | 3/16 in |
Pressure Port Size, Shaft End: | Standard Blue Paint |
Shaft End Pressure [Max: | Axial Piston Pumps |
Seal Material: | PVM018 |
Pump Series: | 33.0 LB |
Pressure Port Size, Cover End: | Right Hand (CW) |
Port Orientation - Shaft End: | PVM018ER02AE01AAA07000000A0A |
Manufacturer Part No.: | PVM018ER02AE01AAA07000000A0A |
Product Details
GPM @ 1,800 rpm, Cover End | 3/16 in |
Pressure Port Size, Shaft End | Standard Blue Paint |
Shaft End Pressure [Max | Axial Piston Pumps |
Seal Material | PVM018 |
Pump Series | 33.0 LB |
Pressure Port Size, Cover End | Right Hand (CW) |
Port Orientation - Shaft End | PVM018ER02AE01AAA07000000A0A |
Manufacturer Part No. | PVM018ER02AE01AAA07000000A0A |
Major Diameter [Min | Open Circuit Axial |
Shaft Length | 1800 rpm |
Integral Valve Configuration | 4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm |
Port Orientation - Cover End | SAE-20 |
Relief Valve Setting | 0.75 in |
Cover End Flow @ RPM | 3/4 |
Shaft End Flow @ RPM | Straight Keyed |
Shaft End RPM [Max | 8.2 gpm @ 1750 rpm |
Spline Description | SAE-12 |
Displacement Shaft End (cu in/revolution) | Electric Motor Speeds |
GPM @ 1,800 rpm, Shaft End | Pressure Compensator |
Minor Diameter [Max | 0.94 in |
Minor Diameter [Min | End Port |
Cover End Pressure [Max | Buna-N |
Displacement Cover End (cu in/revolution) | 3.25 in |
Controlled Flow Rate | 8.2 |
Shaft Seal Type | SAE A, 2 Bolt |
Major Diameter [Max | 4 3/16 in |
Max. RPM [Max | Adjustable Maximum Displacement Stop & Single Shaft Seal |
Minor Diameter | SAE 19-1 |
Mounting Flange | 918 |
Cover End RPM [Max | N/A |
Peak Pressure [Max | 5000 |
HP @ 1,800 rpm [Max | 22 hp |
Auxiliary Mounting Pad | Single Pump, Non-Thru-Drive |
Displacement (in³/rev) | 1.1 |
Torque @ 3000 psi [Max | 62 |
Flow Compensator Setting | None |
Operating Pressure [Max | 5000 psi |
Continuous Pressure [Max | 4000 |
Intermittent Pressure [Max | 4600 |
Pressure Compensator Setting | 70 Bar |