SEALMASTER SFT-22C CR Flange Block Bearings
SEALMASTER SFT-22C CR Flange Block Bearings, Units and Housings 20.6 mm s1 CAD models , SEALMASTER Bearing 8 Nm Recommended tightening torque for set screw Manufacturing Service . Get BEARING MEXICO,S.A.DE C.V. Your Free.
What is SFT-22C CR bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
SFT-22C CR |
| Shaft Key: |
45.0 LB |
| Major Diameter [Min: |
Flange Mount |
| GPM @ 1,800 rpm, Cover End: |
Left Hand (CCW) |
| Major Diameter [Max: |
2520VQ14A5-1AA20-LH |
| Minor Diameter [Max: |
2 1/2 |
| Port Type: |
Flange |
| Port Size: |
3/16 in |
| Cover End RPM [Max: |
Standard Pilot |
Product Details
| Shaft Key |
45.0 LB |
| Major Diameter [Min |
Flange Mount |
| GPM @ 1,800 rpm, Cover End |
Left Hand (CCW) |
| Major Diameter [Max |
2520VQ14A5-1AA20-LH |
| Minor Diameter [Max |
2 1/2 |
| Port Type |
Flange |
| Port Size |
3/16 in |
| Cover End RPM [Max |
Standard Pilot |
| Pressure Port Size, Cover End |
0.875 in |
| Integral Valve Configuration |
Straight w/ Key |
| Relief Valve Setting |
2520VQ |
| Pilot Type |
1.9375 in |
| Shaft Type |
Buna-N |
| Mounting |
2700 |
| Shaft Seal Type |
N/A |
| Minor Diameter [Min |
SAE B, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Mounting Flange |
N/A |
| Weight |
2700 |
| Spline Description |
2700 |
| Shaft End Flow @ RPM |
N/A |
| Pump Series |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
N/A |
| Minor Diameter |
N/A |
| Rotation |
N/A |
| Shaft End Pressure [Max |
N/A |
| Manufacturer Part No. |
N/A |
| Model No. |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End |
2520VQ14A5-1AA20-LH |
| Shaft End RPM [Max |
3000 |
| Port Orientation - Cover End |
3000 |
| Controlled Flow Rate |
7.5 |
| Max. RPM [Max |
21 |
| Cover End Flow @ RPM |
w/o Integral Valves |
| Seal Material |
Outlet 135° CCW from Inlet |
| Cover End Pressure [Max |
Outlet Opposite Inlet |
| Shaft Length |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |
| Displacement Shaft End (cu in/revolution) |
2.77 |