SEALMASTER SC-11C Cartridge Unit Bearings
Can't find BEARING MEXICO,S.A.DE C.V. what you're looking for SEALMASTER SC-11C Cartridge Unit Bearings ? 8 kN C0 Our expert SEALMASTER Bearing Representatives be in contact SCO205-25 Designation of open end cover with you shortly!
What is SC-11C bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
SC-11C |
| Major Diameter [Max: |
35.0 LB |
| Cover End Pressure [Max: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Spline Description: |
V2020-1F7S6S-11AA30 |
| Shaft End Pressure [Max: |
2 |
| Port Size: |
Flange |
| Port Type: |
N/A |
| Pilot Type: |
N/A |
Product Details
| Major Diameter [Max |
35.0 LB |
| Cover End Pressure [Max |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Spline Description |
V2020-1F7S6S-11AA30 |
| Shaft End Pressure [Max |
2 |
| Port Size |
Flange |
| Port Type |
N/A |
| Pilot Type |
N/A |
| Shaft Dia. |
0.875 in |
| Shaft End RPM [Max |
13 Tooth Splined |
| Integral Valve Configuration |
V2020 |
| Shaft Key |
1.3125 in |
| Seal Material |
Buna-N |
| Relief Valve Setting |
3000 |
| Mounting Flange |
0.728 in |
| Minor Diameter [Min |
SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End |
Single Shaft Seal |
| Shaft Type |
16/32 |
| GPM @ 1,800 rpm, Cover End |
3000 |
| Pressure Port Size, Cover End |
3000 |
| Weight |
N/A |
| Major Diameter [Min |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
0.873 in |
| Mounting |
0.872 in |
| Rotation |
0.7335 in |
| Max. RPM [Max |
0.7225 in |
| Controlled Flow Rate |
N/A |
| Manufacturer Part No. |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Shaft Seal Type |
V2020-1F7S6S-11AA30 |
| Shaft End Flow @ RPM |
2500 |
| Pump Series |
2500 |
| Minor Diameter [Max |
9 |
| Model No. |
10.5 |
| Cover End RPM [Max |
N/A |
| Port Orientation - Shaft End |
Outlet Opposite Inlet |
| Port Orientation - Cover End |
Outlet Opposite Inlet |
| Shaft Length |
3/4 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
1.19 |
| Displacement Shaft End (cu in/revolution) |
1.39 |