2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.625 Inch | 117.475 Millimeter SEALMASTER SCHBD-43 Hanger Unit Bearings
Question2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.625 Inch | 117.475 Millimeter SEALMASTER SCHBD-43 Hanger Unit Bearings ? BEARING MEXICO,S.A.DE C.V. Find what you 510 kN Static load, C0 need faster by entering your 2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.625 Inch | 117.475 Millimeter SEALMASTER Bearing information . 260 mm D
What is SCHBD-43 bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
SCHBD-43 |
| Minor Diameter [Min: |
76.0 LB |
| Shaft Type: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Cover End Pressure [Max: |
3525VQ25A21-11CC20 |
| Rotation: |
3 |
| Cover End RPM [Max: |
Flange |
| Port Orientation - Cover End: |
N/A |
| Shaft Length: |
Standard Pilot |
Product Details
| Minor Diameter [Min |
76.0 LB |
| Shaft Type |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Cover End Pressure [Max |
3525VQ25A21-11CC20 |
| Rotation |
3 |
| Cover End RPM [Max |
Flange |
| Port Orientation - Cover End |
N/A |
| Shaft Length |
Standard Pilot |
| Pilot Type |
1.25 in |
| Relief Valve Setting |
14 Tooth Splined |
| Shaft End Pressure [Max |
3525VQ |
| GPM @ 1,800 rpm, Cover End |
1.9375 in |
| Shaft Seal Type |
Buna-N |
| Minor Diameter [Max |
2500 |
| Weight |
1.04 in |
| Cover End Flow @ RPM |
SAE C, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Shaft Dia. |
12/24 |
| Mounting |
2500 |
| Major Diameter [Max |
2500 |
| Shaft End RPM [Max |
N/A |
| Max. RPM [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting Flange |
1.248 in |
| Controlled Flow Rate |
1.247 in |
| Pump Series |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Integral Valve Configuration |
N/A |
| Port Size |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
3525VQ25A21-11CC20 |
| Shaft Key |
3000 |
| Minor Diameter |
3000 |
| Model No. |
31.5 |
| Manufacturer Part No. |
37.5 |
| Port Orientation - Shaft End |
w/o Integral Valves |
| Port Type |
Outlet 45° CW from Inlet |
| Seal Material |
Outlet Inline w/Inlet |
| Spline Description |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
4.12 |
| Displacement Shaft End (cu in/revolution) |
4.98 |