SEALMASTER RFPA 107 Flange Block Bearings
Can't find what you're looking for SEALMASTER RFPA 107 Flange Block Bearings ? Our expert SEALMASTER Bearing Representatives BEARING MEXICO,S.A.DE C.V. be in 49.21 mm d contact with you shortly!
What is RFPA 107 bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
RFPA 107 |
| Weight: |
45.0 LB |
| Controlled Flow Rate: |
Flange Mount |
| Model No.: |
Right Hand (CW) |
| Shaft Key: |
2520VQ17A8-11DC20 |
| Shaft End Pressure [Max: |
2 1/2 |
| Spline Description: |
Flange |
| Minor Diameter [Min: |
N/A |
| Integral Valve Configuration: |
Standard Pilot |
Product Details
| Weight |
45.0 LB |
| Controlled Flow Rate |
Flange Mount |
| Model No. |
Right Hand (CW) |
| Shaft Key |
2520VQ17A8-11DC20 |
| Shaft End Pressure [Max |
2 1/2 |
| Spline Description |
Flange |
| Minor Diameter [Min |
N/A |
| Integral Valve Configuration |
Standard Pilot |
| Port Size |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| Shaft End RPM [Max |
2520VQ |
| Mounting |
1 3/8 in |
| Minor Diameter [Max |
Buna-N |
| Minor Diameter |
2500 |
| Cover End RPM [Max |
0.715 in |
| Shaft Length |
SAE B, 2 Bolt |
| Pump Series |
Single Shaft Seal |
| Manufacturer Part No. |
16/32 |
| Pressure Port Size, Cover End |
2700 |
| Shaft Seal Type |
2500 |
| Relief Valve Setting |
N/A |
| Rotation |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Major Diameter [Min |
0.873 in |
| Major Diameter [Max |
0.872 in |
| Port Type |
N/A |
| Mounting Flange |
N/A |
| Port Orientation - Shaft End |
N/A |
| Max. RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
2520VQ17A8-11DC20 |
| Seal Material |
3000 |
| Cover End Pressure [Max |
3000 |
| Port Orientation - Cover End |
12 |
| Pilot Type |
25.5 |
| Shaft Type |
w/o Integral Valves |
| GPM @ 1,800 rpm, Shaft End |
Outlet 45° CW from Inlet |
| Cover End Flow @ RPM |
Outlet 90° CW from Inlet |
| GPM @ 1,800 rpm, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1.67 |
| Displacement Shaft End (cu in/revolution) |
3.37 |