2 Inch | 50.8 Millimeter x 2.188 Inch | 55.575 Millimeter x 2.438 Inch | 61.925 Millimeter SEALMASTER NPL-32 Pillow Block Bearings
How do I place BEARING MEXICO,S.A.DE C.V. an EMERGENCY order for a 2 Inch | 50.8 Millimeter x 2.188 Inch | 55.575 Millimeter x 2.438 Inch | 61.925 Millimeter SEALMASTER NPL-32 Pillow Block Bearings that I want to pick 2 Inch | 50.8 Millimeter x 2.188 Inch | 55.575 Millimeter x 2.438 Inch | 61.925 Millimeter up at 9 mm B a our store?
What is NPL-32 bearing cross reference?
Brand Name: |
SEALMASTER |
Model Number: |
NPL-32 |
Integral Valve Configuration: |
45.0 LB |
Mounting Flange: |
Flange Mount |
Shaft Key: |
Right Hand (CW) |
Seal Material: |
2520VQ17A8-1CC20 |
Cover End Pressure [Max: |
2.5 |
Relief Valve Setting: |
Flange |
Weight: |
3/16 in |
Rotation: |
Standard Pilot |
Product Details
Integral Valve Configuration |
45.0 LB |
Mounting Flange |
Flange Mount |
Shaft Key |
Right Hand (CW) |
Seal Material |
2520VQ17A8-1CC20 |
Cover End Pressure [Max |
2.5 |
Relief Valve Setting |
Flange |
Weight |
3/16 in |
Rotation |
Standard Pilot |
Manufacturer Part No. |
0.875 in |
Minor Diameter [Min |
Straight w/ Key |
Shaft End Flow @ RPM |
2520VQ |
Controlled Flow Rate |
1 15/16 in |
Minor Diameter |
Double |
Major Diameter [Max |
Buna-N |
Port Orientation - Cover End |
2500 |
Shaft Length |
N/A |
Mounting |
SAE B, 2 Bolt |
Pump Series |
Single Shaft Seal |
Shaft Dia. |
N/A |
Max. RPM [Max |
2700 |
Pressure Port Size, Cover End |
3/4 in Flange |
Model No. |
N/A |
GPM @ 1,800 rpm, Cover End |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Port Orientation - Shaft End |
N/A |
Pilot Type |
N/A |
Shaft End RPM [Max |
N/A |
Spline Description |
N/A |
Shaft End Pressure [Max |
N/A |
Cover End RPM [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft Type |
2520VQ17A8-1CC20 |
Shaft Seal Type |
3000 |
Port Size |
3000 |
Minor Diameter [Max |
12 |
Port Type |
25.5 |
GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
Major Diameter [Min |
Outlet 45° CW from Inlet |
Cover End Flow @ RPM |
Outlet Inline w/Inlet |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
1.7 |
Displacement Shaft End (cu in/revolution) |
3.4 |