1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.563 Inch | 39.7 Millimeter SEALMASTER NPL-18C Pillow Block Bearings
Our highly-skilled and factory-trained 1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.563 Inch | 39.7 Millimeter service experts have the resources to help you with all your 1.125 Inch | 28.575 Millimeter x 1.5 Inch | 38.1 Millimeter x 1.563 Inch | 39.7 Millimeter SEALMASTER NPL-18C Pillow Block Bearings needs - including routine maintenance, major repairs, warranty service, BEARING MEXICO,S.A.DE C.V. and SEALMASTER Bearing equipment inspections.
What is NPL-18C bearing interchange?
Brand Name: |
SEALMASTER |
Model Number: |
NPL-18C |
Shaft Dia.: |
45.0 LB |
Shaft End Pressure [Max: |
Flange Mount |
Weight: |
Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End: |
2520VQ17A8-1CC20-LH |
GPM @ 1,800 rpm, Shaft End: |
2 1/2 |
Port Size: |
Flange |
Rotation: |
3/16 in |
Model No.: |
Standard Pilot |
Product Details
Shaft Dia. |
45.0 LB |
Shaft End Pressure [Max |
Flange Mount |
Weight |
Left Hand (CCW) |
GPM @ 1,800 rpm, Cover End |
2520VQ17A8-1CC20-LH |
GPM @ 1,800 rpm, Shaft End |
2 1/2 |
Port Size |
Flange |
Rotation |
3/16 in |
Model No. |
Standard Pilot |
Major Diameter [Min |
0.875 in |
Spline Description |
Straight w/ Key |
Cover End Pressure [Max |
2520VQ |
Max. RPM [Max |
1.9375 in |
Shaft Seal Type |
Buna-N |
Major Diameter [Max |
2500 |
Pump Series |
N/A |
Controlled Flow Rate |
SAE B, 2 Bolt |
Seal Material |
Single Shaft Seal |
Minor Diameter |
N/A |
Port Type |
2700 |
Shaft Type |
2500 |
Pilot Type |
N/A |
Mounting Flange |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Port Orientation - Cover End |
N/A |
Manufacturer Part No. |
N/A |
Integral Valve Configuration |
N/A |
Shaft End RPM [Max |
N/A |
Mounting |
N/A |
Minor Diameter [Max |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft End Flow @ RPM |
2520VQ17A8-1CC20-LH |
Port Orientation - Shaft End |
3000 |
Pressure Port Size, Cover End |
3000 |
Shaft Length |
12 |
Cover End Flow @ RPM |
25.5 |
Minor Diameter [Min |
w/o Integral Valves |
Shaft Key |
Outlet 45° CW from Inlet |
Cover End RPM [Max |
Outlet Inline w/Inlet |
Relief Valve Setting |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
1.67 |
Displacement Shaft End (cu in/revolution) |
3.37 |