1 Inch | 25.4 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-16TC CR Pillow Block Bearings
1 Inch | 25.4 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-16TC CR Pillow Block Bearings BEARING MEXICO,S.A.DE C.V. Needs Analysis , SEALMASTER Bearing 1 Inch | 25.4 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter Manufacturing Service . Get Your Free.
What is NPL-16TC CR bearing cross reference?
Brand Name: |
SEALMASTER |
Model Number: |
NPL-16TC CR |
Major Diameter [Max: |
30.0 LB |
Model No.: |
Flange Mount |
GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
Shaft Key: |
V2010-1F13B2B-1DD12 |
Controlled Flow Rate: |
1 1/2 |
Integral Valve Configuration: |
Flange |
Weight: |
3/16 in |
Port Orientation - Cover End: |
N/A |
Product Details
Major Diameter [Max |
30.0 LB |
Model No. |
Flange Mount |
GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
Shaft Key |
V2010-1F13B2B-1DD12 |
Controlled Flow Rate |
1 1/2 |
Integral Valve Configuration |
Flange |
Weight |
3/16 in |
Port Orientation - Cover End |
N/A |
Rotation |
0.875 in |
Port Size |
Straight w/ Key |
GPM @ 1,800 rpm, Shaft End |
V2010 |
Seal Material |
2.3125 in |
Shaft Seal Type |
Buna-N |
Minor Diameter |
2400 |
Cover End Pressure [Max |
N/A |
Cover End RPM [Max |
SAE B, 2 Bolt |
Spline Description |
Single Shaft Seal |
Shaft Dia. |
N/A |
Shaft End RPM [Max |
3000 |
Pressure Port Size, Cover End |
2400 |
Manufacturer Part No. |
N/A |
Shaft End Flow @ RPM |
2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm |
Pilot Type |
N/A |
Shaft Length |
N/A |
Major Diameter [Min |
N/A |
Mounting Flange |
N/A |
Mounting |
N/A |
Shaft End Pressure [Max |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
Minor Diameter [Min |
V2010-1F13B2B-1DD12 |
Minor Diameter [Max |
2500 |
Relief Valve Setting |
2200 |
Port Orientation - Shaft End |
3 |
Shaft Type |
19.5 |
Max. RPM [Max |
N/A |
Port Type |
Outlet 135° CW from Inlet |
Pump Series |
Outlet 90° CW from Inlet |
Cover End Flow @ RPM |
1/2 in SAE O-Ring |
Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
Displacement Cover End (cu in/revolution) |
0.4 |
Displacement Shaft End (cu in/revolution) |
2.59 |