0.875 Inch | 22.225 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-14 Pillow Block Bearings
100% 4.78 kN C0 Authentic. 0.875 Inch | 22.225 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-14 Pillow Block Bearings Highest 0.875 Inch | 22.225 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter Quality. Certified BEARING MEXICO,S.A.DE C.V. Supplier. 3 mm SW
What is NPL-14 bearing cross reference?
Brand Name: |
SEALMASTER |
Model Number: |
NPL-14 |
Weight: |
45.0 LB |
Shaft End Pressure [Max: |
Flange Mount |
GPM @ 1,800 rpm, Cover End: |
Right Hand (CW) |
Shaft End RPM [Max: |
2520VQ21A14-11AD20 |
Shaft Dia.: |
2 1/2 |
Model No.: |
Flange |
Port Orientation - Cover End: |
N/A |
Minor Diameter: |
Standard Pilot |
Product Details
Weight |
45.0 LB |
Shaft End Pressure [Max |
Flange Mount |
GPM @ 1,800 rpm, Cover End |
Right Hand (CW) |
Shaft End RPM [Max |
2520VQ21A14-11AD20 |
Shaft Dia. |
2 1/2 |
Model No. |
Flange |
Port Orientation - Cover End |
N/A |
Minor Diameter |
Standard Pilot |
Minor Diameter [Min |
0.875 in |
Relief Valve Setting |
13 Tooth Splined |
Pilot Type |
2520VQ |
Port Type |
1 3/8 in |
Shaft End Flow @ RPM |
Buna-N |
Max. RPM [Max |
2500 |
Manufacturer Part No. |
0.715 in |
Seal Material |
SAE B, 2 Bolt |
Cover End Flow @ RPM |
Single Shaft Seal |
Shaft Length |
16/32 |
Cover End Pressure [Max |
2700 |
Port Orientation - Shaft End |
2500 |
Major Diameter [Min |
N/A |
Shaft Seal Type |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Major Diameter [Max |
0.873 in |
Rotation |
0.872 in |
Cover End RPM [Max |
N/A |
Shaft Type |
N/A |
Controlled Flow Rate |
N/A |
Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pump Series |
2520VQ21A14-11AD20 |
Shaft Key |
2000 |
Mounting Flange |
3000 |
Spline Description |
21 |
Port Size |
31.5 |
Pressure Port Size, Cover End |
w/o Integral Valves |
GPM @ 1,800 rpm, Shaft End |
Outlet 135° CW from Inlet |
Integral Valve Configuration |
Outlet Opposite Inlet |
Mounting |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
2.8 |
Displacement Shaft End (cu in/revolution) |
4.12 |