0.787 Inch | 20 Millimeter x 1.219 Inch | 30.963 Millimeter x 1.311 Inch | 33.3 Millimeter SEALMASTER NP-204TMC RM Pillow Block Bearings
What 52.5 kN C 18mm N are the types of 0.787 Inch | 20 Millimeter x 1.219 Inch | 30.963 Millimeter x 1.311 Inch | 33.3 Millimeter SEALMASTER NP-204TMC RM Pillow Block Bearings ? SEALMASTER Bearing BEARING MEXICO,S.A.DE C.V. Manufacturing Service . Get Your 0.787 Inch | 20 Millimeter x 1.219 Inch | 30.963 Millimeter x 1.311 Inch | 33.3 Millimeter Free, Instant price, design review.
What is NP-204TMC RM bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
NP-204TMC RM |
| Shaft End Pressure [Max: |
101.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Relief Valve Setting: |
Right Hand (CW) |
| Shaft End RPM [Max: |
4525VQ60A17-11BB20 |
| Mounting: |
3 1/2 |
| Shaft End Flow @ RPM: |
Flange |
| Rotation: |
N/A |
| Minor Diameter: |
Standard Pilot |
Product Details
| Shaft End Pressure [Max |
101.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Relief Valve Setting |
Right Hand (CW) |
| Shaft End RPM [Max |
4525VQ60A17-11BB20 |
| Mounting |
3 1/2 |
| Shaft End Flow @ RPM |
Flange |
| Rotation |
N/A |
| Minor Diameter |
Standard Pilot |
| Model No. |
1.25 in |
| Cover End RPM [Max |
14 Tooth Splined |
| Cover End Pressure [Max |
4525VQ |
| Spline Description |
1.9375 in |
| Manufacturer Part No. |
Buna-N |
| Minor Diameter [Max |
2200 |
| Port Type |
1.04 in |
| Mounting Flange |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Integral Valve Configuration |
12/24 |
| Controlled Flow Rate |
2200 |
| GPM @ 1,800 rpm, Shaft End |
2200 |
| Port Orientation - Cover End |
N/A |
| Shaft Key |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Port Size |
1.248 in |
| Pilot Type |
1.247 in |
| Major Diameter [Min |
N/A |
| Seal Material |
N/A |
| Pump Series |
N/A |
| Shaft Type |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End |
4525VQ60A17-11BB20 |
| Shaft Length |
3000 |
| Major Diameter [Max |
2500 |
| Shaft Dia. |
25.5 |
| Max. RPM [Max |
90 |
| Minor Diameter [Min |
w/o Integral Valves |
| Shaft Seal Type |
Outlet 45° CCW from Inlet |
| Weight |
Outlet 90° CCW from Inlet |
| Cover End Flow @ RPM |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
3.37 |
| Displacement Shaft End (cu in/revolution) |
11.8 |