1.25 Inch | 31.75 Millimeter x 1.688 Inch | 42.87 Millimeter x 1.875 Inch | 47.63 Millimeter SEALMASTER NP-20 CXU Pillow Block Bearings
170 Million used 1.25 Inch | 31.75 Millimeter x 1.688 Inch | 42.87 Millimeter x 1.875 Inch | 47.63 Millimeter SEALMASTER NP-20 CXU Pillow Block Bearings instantly searchable. Shop our large selection of BEARING MEXICO,S.A.DE C.V. parts based 1.25 Inch | 31.75 Millimeter x 1.688 Inch | 42.87 Millimeter x 1.875 Inch | 47.63 Millimeter on brand, price, description, and location. Order the SEALMASTER Bearing with stock ...
What is NP-20 CXU bearing interchange?
Brand Name: |
SEALMASTER |
Model Number: |
NP-20 CXU |
Cover End Flow @ RPM: |
76.0 LB |
Port Orientation - Shaft End: |
Flange Mount |
Shaft End Pressure [Max: |
Right Hand (CW) |
Cover End RPM [Max: |
3525VQ25A21-11DD20 |
Shaft Seal Type: |
3 |
Pressure Port Size, Cover End: |
Flange |
Pilot Type: |
N/A |
Max. RPM [Max: |
Standard Pilot |
Product Details
Cover End Flow @ RPM |
76.0 LB |
Port Orientation - Shaft End |
Flange Mount |
Shaft End Pressure [Max |
Right Hand (CW) |
Cover End RPM [Max |
3525VQ25A21-11DD20 |
Shaft Seal Type |
3 |
Pressure Port Size, Cover End |
Flange |
Pilot Type |
N/A |
Max. RPM [Max |
Standard Pilot |
Port Size |
1.25 in |
Minor Diameter |
14 Tooth Splined |
Minor Diameter [Min |
3525VQ |
Shaft Key |
1 15/16 in |
Spline Description |
Buna-N |
Port Orientation - Cover End |
2500 |
GPM @ 1,800 rpm, Shaft End |
1.04 in |
Seal Material |
SAE C, 2 Bolt |
Minor Diameter [Max |
Single Shaft Seal |
Major Diameter [Min |
12/24 |
Controlled Flow Rate |
2500 |
Mounting |
2500 |
Major Diameter [Max |
N/A |
Manufacturer Part No. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Mounting Flange |
1.248 in |
Weight |
1.247 in |
Rotation |
N/A |
Cover End Pressure [Max |
N/A |
Port Type |
N/A |
Shaft Type |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Integral Valve Configuration |
3525VQ25A21-11DD20 |
Shaft End Flow @ RPM |
3000 |
Shaft Dia. |
3000 |
Pump Series |
31.5 |
Model No. |
37.5 |
Shaft Length |
w/o Integral Valves |
GPM @ 1,800 rpm, Cover End |
Outlet 135° CW from Inlet |
Shaft End RPM [Max |
Outlet 90° CW from Inlet |
Relief Valve Setting |
1 in Flange |
Pressure Port Size, Shaft End |
1 1/4 in Flange |
Displacement Cover End (cu in/revolution) |
4.12 |
Displacement Shaft End (cu in/revolution) |
4.98 |