SEALMASTER MSFT-28T Flange Block Bearings
How do I place an EMERGENCY order for a SEALMASTER MSFT-28T Flange Block Bearings that I want to pick up 100 °C T max. at BEARING MEXICO,S.A.DE C.V. a our store?
What is MSFT-28T bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
MSFT-28T |
| Shaft Type: |
75.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Shaft Length: |
Right Hand (CW) |
| Minor Diameter [Min: |
3520VQ30A5-11DD20 |
| Cover End RPM [Max: |
3 |
| Port Orientation - Shaft End: |
Flange |
| Max. RPM [Max: |
N/A |
| Shaft End Flow @ RPM: |
Standard Pilot |
Product Details
| Shaft Type |
75.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Shaft Length |
Right Hand (CW) |
| Minor Diameter [Min |
3520VQ30A5-11DD20 |
| Cover End RPM [Max |
3 |
| Port Orientation - Shaft End |
Flange |
| Max. RPM [Max |
N/A |
| Shaft End Flow @ RPM |
Standard Pilot |
| Port Orientation - Cover End |
1.25 in |
| Pump Series |
14 Tooth Splined |
| Shaft End Pressure [Max |
3520VQ |
| Spline Description |
1 15/16 in |
| Mounting Flange |
Buna-N |
| Major Diameter [Max |
2500 |
| Shaft Seal Type |
1.04 in |
| Major Diameter [Min |
SAE C, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Seal Material |
12/24 |
| Shaft Dia. |
2500 |
| Pressure Port Size, Cover End |
2500 |
| Controlled Flow Rate |
N/A |
| Shaft Key |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Type |
1.248 in |
| Minor Diameter [Max |
1.247 in |
| Cover End Flow @ RPM |
N/A |
| Weight |
N/A |
| Shaft End RPM [Max |
N/A |
| Manufacturer Part No. |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Pilot Type |
3520VQ30A5-11DD20 |
| Model No. |
3000 |
| Minor Diameter |
3000 |
| Cover End Pressure [Max |
7.5 |
| Rotation |
45 |
| GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
| Relief Valve Setting |
Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CW from Inlet |
| Mounting |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
1.1 |
| Displacement Shaft End (cu in/revolution) |
5.96 |