SEALMASTER MSC-40 Cartridge Unit Bearings
Browse SEALMASTER MSC-40 Cartridge Unit Bearings Categories in 3.07 mm a min the Manufacturers Online Free. 3.28 mm a max including BEARING MEXICO,S.A.DE C.V. SEALMASTER Bearing.
What is MSC-40 bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
MSC-40 |
| Shaft End Flow @ RPM: |
30.0 LB |
| Minor Diameter: |
Flange Mount |
| Cover End Flow @ RPM: |
Left Hand (CCW) |
| Controlled Flow Rate: |
V2010-1F11S3S-11CC12LH |
| Shaft Length: |
1 1/2 |
| Model No.: |
Flange |
| Port Orientation - Cover End: |
N/A |
| Mounting Flange: |
N/A |
Product Details
| Shaft End Flow @ RPM |
30.0 LB |
| Minor Diameter |
Flange Mount |
| Cover End Flow @ RPM |
Left Hand (CCW) |
| Controlled Flow Rate |
V2010-1F11S3S-11CC12LH |
| Shaft Length |
1 1/2 |
| Model No. |
Flange |
| Port Orientation - Cover End |
N/A |
| Mounting Flange |
N/A |
| Weight |
0.875 in |
| Integral Valve Configuration |
13 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
V2010 |
| Pilot Type |
1.3125 in |
| Mounting |
Buna-N |
| Port Type |
2500 |
| Shaft Dia. |
0.728 in |
| Shaft Type |
SAE B, 2 Bolt |
| Pressure Port Size, Cover End |
Single Shaft Seal |
| Spline Description |
16/32 |
| Port Orientation - Shaft End |
3000 |
| Shaft Seal Type |
2500 |
| Max. RPM [Max |
N/A |
| Shaft End RPM [Max |
3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
| Minor Diameter [Max |
0.873 in |
| GPM @ 1,800 rpm, Shaft End |
0.872 in |
| Shaft Key |
0.7335 in |
| Manufacturer Part No. |
0.7225 in |
| Cover End Pressure [Max |
N/A |
| Major Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
V2010-1F11S3S-11CC12LH |
| Port Size |
2500 |
| Minor Diameter [Min |
2500 |
| Rotation |
4.5 |
| Pump Series |
16.5 |
| Cover End RPM [Max |
N/A |
| Seal Material |
Outlet 45° CW from Inlet |
| Relief Valve Setting |
Outlet Inline w/Inlet |
| Major Diameter [Min |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.6 |
| Displacement Shaft End (cu in/revolution) |
2.22 |