SEALMASTER MFC-56 Flange Block Bearings
With over 10170 full-service stores, 143 kN C our SEALMASTER MFC-56 Flange Block Bearings inventory is P318- Designation of housing extensive 96 mm B and our parts are priced right. within 24 hours. This helps you maximize BEARING MEXICO,S.A.DE C.V. your productivity by saving time and your hard-earned dollars.
What is MFC-56 bearing cross reference？
| Brand Name: |
SEALMASTER |
| Model Number: |
MFC-56 |
| Minor Diameter [Min: |
76.0 LB |
| Mounting Flange: |
Flange Mount |
| Shaft End Flow @ RPM: |
Right Hand (CW) |
| Mounting: |
3525VQ35A21-11DD20 |
| Port Orientation - Shaft End: |
3 |
| Major Diameter [Max: |
Flange |
| Pilot Type: |
N/A |
| Controlled Flow Rate: |
Standard Pilot |
Product Details
| Minor Diameter [Min |
76.0 LB |
| Mounting Flange |
Flange Mount |
| Shaft End Flow @ RPM |
Right Hand (CW) |
| Mounting |
3525VQ35A21-11DD20 |
| Port Orientation - Shaft End |
3 |
| Major Diameter [Max |
Flange |
| Pilot Type |
N/A |
| Controlled Flow Rate |
Standard Pilot |
| Shaft Type |
1.25 in |
| Shaft Key |
14 Tooth Splined |
| Port Size |
3525VQ |
| Pump Series |
1.9375 in |
| Cover End Pressure [Max |
Buna-N |
| Seal Material |
2400 |
| Major Diameter [Min |
1.04 in |
| Integral Valve Configuration |
SAE C, 2 Bolt |
| Relief Valve Setting |
Single Shaft Seal |
| Weight |
12/24 |
| Shaft End RPM [Max |
2500 |
| Minor Diameter [Max |
2400 |
| Shaft Seal Type |
N/A |
| Shaft Length |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Dia. |
1.248 in |
| Spline Description |
1.247 in |
| Cover End Flow @ RPM |
N/A |
| Model No. |
N/A |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Manufacturer Part No. |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Cover End RPM [Max |
3525VQ35A21-11DD20 |
| Rotation |
3000 |
| Port Type |
3000 |
| Shaft End Pressure [Max |
31.5 |
| Port Orientation - Cover End |
52.5 |
| GPM @ 1,800 rpm, Cover End |
w/o Integral Valves |
| Max. RPM [Max |
Outlet 135° CW from Inlet |
| Pressure Port Size, Cover End |
Outlet 90° CW from Inlet |
| Minor Diameter |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
4.12 |
| Displacement Shaft End (cu in/revolution) |
6.88 |