SEALMASTER CRSTF-PN20R Take Up Unit Bearings
SEALMASTER CRSTF-PN20R Take Up Unit Bearings Engineering BEARING MEXICO,S.A.DE C.V. NTN Brand Calculator , SEALMASTER Bearing 22,000 rpm Nlim (grease) Manufacturing Service . Get 13.1 mm da max Your Free.
What is CRSTF-PN20R bearing interchange？
| Brand Name: |
SEALMASTER |
| Model Number: |
CRSTF-PN20R |
| Pressure Port Size, Cover End: |
45.0 LB |
| Mounting Flange: |
Flange Mount |
| Minor Diameter: |
Right Hand (CW) |
| Mounting: |
2520VQ17A14-1BB20 |
| Port Orientation - Cover End: |
2 1/2 |
| Shaft Seal Type: |
Flange |
| Shaft End RPM [Max: |
3/16 in |
| Max. RPM [Max: |
Standard Pilot |
Product Details
| Pressure Port Size, Cover End |
45.0 LB |
| Mounting Flange |
Flange Mount |
| Minor Diameter |
Right Hand (CW) |
| Mounting |
2520VQ17A14-1BB20 |
| Port Orientation - Cover End |
2 1/2 |
| Shaft Seal Type |
Flange |
| Shaft End RPM [Max |
3/16 in |
| Max. RPM [Max |
Standard Pilot |
| Minor Diameter [Max |
0.875 in |
| Major Diameter [Min |
Straight w/ Key |
| Port Orientation - Shaft End |
2520VQ |
| Pump Series |
1.9375 in |
| Shaft Type |
Buna-N |
| Shaft End Pressure [Max |
2500 |
| Pilot Type |
N/A |
| Port Size |
SAE B, 2 Bolt |
| Minor Diameter [Min |
Single Shaft Seal |
| Model No. |
N/A |
| GPM @ 1,800 rpm, Shaft End |
2700 |
| Relief Valve Setting |
2500 |
| Rotation |
N/A |
| Shaft Length |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Seal Material |
N/A |
| Spline Description |
N/A |
| Cover End Flow @ RPM |
N/A |
| Port Type |
N/A |
| Controlled Flow Rate |
N/A |
| Integral Valve Configuration |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
2520VQ17A14-1BB20 |
| GPM @ 1,800 rpm, Cover End |
2000 |
| Shaft Key |
3000 |
| Cover End RPM [Max |
21 |
| Major Diameter [Max |
25.5 |
| Shaft Dia. |
w/o Integral Valves |
| Weight |
Outlet 45° CCW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CCW from Inlet |
| Manufacturer Part No. |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.8 |
| Displacement Shaft End (cu in/revolution) |
3.37 |