101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
Port Orientation - Cover End: | 45.0 LB |
Minor Diameter: | Flange Mount |
Spline Description: | Left Hand (CCW) |
Cover End Flow @ RPM: | 2520VQ14C14-11CC20-LH |
Weight: | 2 1/2 |
Minor Diameter [Max: | Flange |
Port Size: | N/A |
Cover End RPM [Max: | Standard Pilot |
PDF |
|
Product Details
Port Orientation - Cover End | 45.0 LB |
Minor Diameter | Flange Mount |
Spline Description | Left Hand (CCW) |
Cover End Flow @ RPM | 2520VQ14C14-11CC20-LH |
Weight | 2 1/2 |
Minor Diameter [Max | Flange |
Port Size | N/A |
Cover End RPM [Max | Standard Pilot |
Max. RPM [Max | 0.875 in |
Pilot Type | 13 Tooth Splined |
Integral Valve Configuration | 2520VQ |
Model No. | 1.375 in |
Pressure Port Size, Shaft End | Buna-N |
Rotation | 2700 |
GPM @ 1,800 rpm, Shaft End | 0.715 in |
Major Diameter [Max | SAE B, 2 Bolt |
Cover End Pressure [Max | Single Shaft Seal |
Mounting | 16/32 |
GPM @ 1,800 rpm, Cover End | 2700 |
Major Diameter [Min | 2700 |
Pressure Port Size, Cover End | N/A |
Port Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Manufacturer Part No. | 0.873 in |
Shaft End RPM [Max | 0.872 in |
Shaft End Flow @ RPM | N/A |
Minor Diameter [Min | N/A |
Shaft End Pressure [Max | N/A |
Port Orientation - Shaft End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Pump Series | 2520VQ14C14-11CC20-LH |
Shaft Key | 2000 |
Controlled Flow Rate | 3000 |
Seal Material | 21 |
Shaft Type | 21 |
Relief Valve Setting | w/o Integral Valves |
Shaft Length | Outlet 45° CW from Inlet |
Shaft Dia. | Outlet Inline w/Inlet |
Shaft Seal Type | 1 1/16 in SAE O-Ring |
Mounting Flange | 1 5/16 in SAE O-Ring |
Displacement Cover End (cu in/revolution) | 2.8 |
Displacement Shaft End (cu in/revolution) | 2.77 |