1.688 Inch | 42.875 Millimeter x 4.375 Inch | 111.125 Millimeter x 3.25 Inch | 82.55 Millimeter SEALMASTER SEHB-27 Hanger Unit Bearings
Enjoy BEARING MEXICO,S.A.DE C.V. High 16mm N Margins on Competitive SEALMASTER Bearing Pricing.Great Wholesale Products 14 mm A1 at 1.688 Inch | 42.875 Millimeter x 4.375 Inch | 111.125 Millimeter x 3.25 Inch | 82.55 Millimeter Low Costs.
What is SEHB-27 bearing interchange?
Brand Name: | SEALMASTER |
Model Number: | SEHB-27 |
Mounting Flange: | 76.0 LB |
Shaft End Pressure [Max: | Flange Mount |
Minor Diameter: | Left Hand (CCW) |
Shaft Seal Type: | 3525VQ38A21-11AA20-LH |
Port Size: | 3 |
Minor Diameter [Min: | Flange |
Pilot Type: | N/A |
Cover End Flow @ RPM: | Standard Pilot |
Product Details
Mounting Flange | 76.0 LB |
Shaft End Pressure [Max | Flange Mount |
Minor Diameter | Left Hand (CCW) |
Shaft Seal Type | 3525VQ38A21-11AA20-LH |
Port Size | 3 |
Minor Diameter [Min | Flange |
Pilot Type | N/A |
Cover End Flow @ RPM | Standard Pilot |
Major Diameter [Min | 1.25 in |
Rotation | 14 Tooth Splined |
Port Orientation - Shaft End | 3525VQ |
Controlled Flow Rate | 1.9375 in |
Major Diameter [Max | Double |
Shaft Type | Buna-N |
Relief Valve Setting | 2400 |
Seal Material | 1.04 in |
Minor Diameter [Max | SAE C, 2 Bolt |
Manufacturer Part No. | Single Shaft Seal |
Weight | 12/24 |
Port Orientation - Cover End | 2500 |
Cover End Pressure [Max | 2400 |
Pump Series | N/A |
Max. RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 1.248 in |
Model No. | 1.247 in |
Port Type | N/A |
Shaft End Flow @ RPM | N/A |
Pressure Port Size, Cover End | 1 in Flange |
Spline Description | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | 3525VQ38A21-11AA20-LH |
Integral Valve Configuration | 3000 |
Shaft Length | 3000 |
Cover End RPM [Max | 31.5 |
Shaft Dia. | 57 |
Shaft Key | w/o Integral Valves |
Mounting | Outlet 135° CCW from Inlet |
GPM @ 1,800 rpm, Cover End | Outlet Opposite Inlet |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.1 |
Displacement Shaft End (cu in/revolution) | 7.4 |