2 Inch | 50.8 Millimeter x 2.188 Inch | 55.575 Millimeter x 2.438 Inch | 61.925 Millimeter SEALMASTER NPL-32 Pillow Block Bearings
How do I place BEARING MEXICO,S.A.DE C.V. an EMERGENCY order for a 2 Inch | 50.8 Millimeter x 2.188 Inch | 55.575 Millimeter x 2.438 Inch | 61.925 Millimeter SEALMASTER NPL-32 Pillow Block Bearings that I want to pick 2 Inch | 50.8 Millimeter x 2.188 Inch | 55.575 Millimeter x 2.438 Inch | 61.925 Millimeter up at 9 mm B a our store?
What is NPL-32 bearing cross reference?
Brand Name: | SEALMASTER |
Model Number: | NPL-32 |
Integral Valve Configuration: | 45.0 LB |
Mounting Flange: | Flange Mount |
Shaft Key: | Right Hand (CW) |
Seal Material: | 2520VQ17A8-1CC20 |
Cover End Pressure [Max: | 2.5 |
Relief Valve Setting: | Flange |
Weight: | 3/16 in |
Rotation: | Standard Pilot |
Product Details
Integral Valve Configuration | 45.0 LB |
Mounting Flange | Flange Mount |
Shaft Key | Right Hand (CW) |
Seal Material | 2520VQ17A8-1CC20 |
Cover End Pressure [Max | 2.5 |
Relief Valve Setting | Flange |
Weight | 3/16 in |
Rotation | Standard Pilot |
Manufacturer Part No. | 0.875 in |
Minor Diameter [Min | Straight w/ Key |
Shaft End Flow @ RPM | 2520VQ |
Controlled Flow Rate | 1 15/16 in |
Minor Diameter | Double |
Major Diameter [Max | Buna-N |
Port Orientation - Cover End | 2500 |
Shaft Length | N/A |
Mounting | SAE B, 2 Bolt |
Pump Series | Single Shaft Seal |
Shaft Dia. | N/A |
Max. RPM [Max | 2700 |
Pressure Port Size, Cover End | 3/4 in Flange |
Model No. | N/A |
GPM @ 1,800 rpm, Cover End | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Port Orientation - Shaft End | N/A |
Pilot Type | N/A |
Shaft End RPM [Max | N/A |
Spline Description | N/A |
Shaft End Pressure [Max | N/A |
Cover End RPM [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft Type | 2520VQ17A8-1CC20 |
Shaft Seal Type | 3000 |
Port Size | 3000 |
Minor Diameter [Max | 12 |
Port Type | 25.5 |
GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
Major Diameter [Min | Outlet 45° CW from Inlet |
Cover End Flow @ RPM | Outlet Inline w/Inlet |
Pressure Port Size, Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 1.7 |
Displacement Shaft End (cu in/revolution) | 3.4 |