0.875 Inch | 22.225 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-14 Pillow Block Bearings
100% 4.78 kN C0 Authentic. 0.875 Inch | 22.225 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter SEALMASTER NPL-14 Pillow Block Bearings Highest 0.875 Inch | 22.225 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.313 Inch | 33.35 Millimeter Quality. Certified BEARING MEXICO,S.A.DE C.V. Supplier. 3 mm SW
What is NPL-14 bearing cross reference?
Brand Name: | SEALMASTER |
Model Number: | NPL-14 |
Weight: | 45.0 LB |
Shaft End Pressure [Max: | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
Shaft End RPM [Max: | 2520VQ21A14-11AD20 |
Shaft Dia.: | 2 1/2 |
Model No.: | Flange |
Port Orientation - Cover End: | N/A |
Minor Diameter: | Standard Pilot |
Product Details
Weight | 45.0 LB |
Shaft End Pressure [Max | Flange Mount |
GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
Shaft End RPM [Max | 2520VQ21A14-11AD20 |
Shaft Dia. | 2 1/2 |
Model No. | Flange |
Port Orientation - Cover End | N/A |
Minor Diameter | Standard Pilot |
Minor Diameter [Min | 0.875 in |
Relief Valve Setting | 13 Tooth Splined |
Pilot Type | 2520VQ |
Port Type | 1 3/8 in |
Shaft End Flow @ RPM | Buna-N |
Max. RPM [Max | 2500 |
Manufacturer Part No. | 0.715 in |
Seal Material | SAE B, 2 Bolt |
Cover End Flow @ RPM | Single Shaft Seal |
Shaft Length | 16/32 |
Cover End Pressure [Max | 2700 |
Port Orientation - Shaft End | 2500 |
Major Diameter [Min | N/A |
Shaft Seal Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Major Diameter [Max | 0.873 in |
Rotation | 0.872 in |
Cover End RPM [Max | N/A |
Shaft Type | N/A |
Controlled Flow Rate | N/A |
Minor Diameter [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pump Series | 2520VQ21A14-11AD20 |
Shaft Key | 2000 |
Mounting Flange | 3000 |
Spline Description | 21 |
Port Size | 31.5 |
Pressure Port Size, Cover End | w/o Integral Valves |
GPM @ 1,800 rpm, Shaft End | Outlet 135° CW from Inlet |
Integral Valve Configuration | Outlet Opposite Inlet |
Mounting | 3/4 in Flange |
Pressure Port Size, Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 2.8 |
Displacement Shaft End (cu in/revolution) | 4.12 |