1.25 Inch | 31.75 Millimeter x 1.688 Inch | 42.87 Millimeter x 1.875 Inch | 47.63 Millimeter SEALMASTER NP-20 CXU Pillow Block Bearings
170 Million used 1.25 Inch | 31.75 Millimeter x 1.688 Inch | 42.87 Millimeter x 1.875 Inch | 47.63 Millimeter SEALMASTER NP-20 CXU Pillow Block Bearings instantly searchable. Shop our large selection of BEARING MEXICO,S.A.DE C.V. parts based 1.25 Inch | 31.75 Millimeter x 1.688 Inch | 42.87 Millimeter x 1.875 Inch | 47.63 Millimeter on brand, price, description, and location. Order the SEALMASTER Bearing with stock ...
What is NP-20 CXU bearing interchange?
Brand Name: | SEALMASTER |
Model Number: | NP-20 CXU |
Cover End Flow @ RPM: | 76.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Shaft End Pressure [Max: | Right Hand (CW) |
Cover End RPM [Max: | 3525VQ25A21-11DD20 |
Shaft Seal Type: | 3 |
Pressure Port Size, Cover End: | Flange |
Pilot Type: | N/A |
Max. RPM [Max: | Standard Pilot |
Product Details
Cover End Flow @ RPM | 76.0 LB |
Port Orientation - Shaft End | Flange Mount |
Shaft End Pressure [Max | Right Hand (CW) |
Cover End RPM [Max | 3525VQ25A21-11DD20 |
Shaft Seal Type | 3 |
Pressure Port Size, Cover End | Flange |
Pilot Type | N/A |
Max. RPM [Max | Standard Pilot |
Port Size | 1.25 in |
Minor Diameter | 14 Tooth Splined |
Minor Diameter [Min | 3525VQ |
Shaft Key | 1 15/16 in |
Spline Description | Buna-N |
Port Orientation - Cover End | 2500 |
GPM @ 1,800 rpm, Shaft End | 1.04 in |
Seal Material | SAE C, 2 Bolt |
Minor Diameter [Max | Single Shaft Seal |
Major Diameter [Min | 12/24 |
Controlled Flow Rate | 2500 |
Mounting | 2500 |
Major Diameter [Max | N/A |
Manufacturer Part No. | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Mounting Flange | 1.248 in |
Weight | 1.247 in |
Rotation | N/A |
Cover End Pressure [Max | N/A |
Port Type | N/A |
Shaft Type | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Integral Valve Configuration | 3525VQ25A21-11DD20 |
Shaft End Flow @ RPM | 3000 |
Shaft Dia. | 3000 |
Pump Series | 31.5 |
Model No. | 37.5 |
Shaft Length | w/o Integral Valves |
GPM @ 1,800 rpm, Cover End | Outlet 135° CW from Inlet |
Shaft End RPM [Max | Outlet 90° CW from Inlet |
Relief Valve Setting | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.12 |
Displacement Shaft End (cu in/revolution) | 4.98 |