SEALMASTER MFC-56 Flange Block Bearings
With over 10170 full-service stores, 143 kN C our SEALMASTER MFC-56 Flange Block Bearings inventory is P318- Designation of housing extensive 96 mm B and our parts are priced right. within 24 hours. This helps you maximize BEARING MEXICO,S.A.DE C.V. your productivity by saving time and your hard-earned dollars.
What is MFC-56 bearing cross reference？
| Brand Name: | SEALMASTER |
| Model Number: | MFC-56 |
| Minor Diameter [Min: | 76.0 LB |
| Mounting Flange: | Flange Mount |
| Shaft End Flow @ RPM: | Right Hand (CW) |
| Mounting: | 3525VQ35A21-11DD20 |
| Port Orientation - Shaft End: | 3 |
| Major Diameter [Max: | Flange |
| Pilot Type: | N/A |
| Controlled Flow Rate: | Standard Pilot |
Product Details
| Minor Diameter [Min | 76.0 LB |
| Mounting Flange | Flange Mount |
| Shaft End Flow @ RPM | Right Hand (CW) |
| Mounting | 3525VQ35A21-11DD20 |
| Port Orientation - Shaft End | 3 |
| Major Diameter [Max | Flange |
| Pilot Type | N/A |
| Controlled Flow Rate | Standard Pilot |
| Shaft Type | 1.25 in |
| Shaft Key | 14 Tooth Splined |
| Port Size | 3525VQ |
| Pump Series | 1.9375 in |
| Cover End Pressure [Max | Buna-N |
| Seal Material | 2400 |
| Major Diameter [Min | 1.04 in |
| Integral Valve Configuration | SAE C, 2 Bolt |
| Relief Valve Setting | Single Shaft Seal |
| Weight | 12/24 |
| Shaft End RPM [Max | 2500 |
| Minor Diameter [Max | 2400 |
| Shaft Seal Type | N/A |
| Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft Dia. | 1.248 in |
| Spline Description | 1.247 in |
| Cover End Flow @ RPM | N/A |
| Model No. | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Manufacturer Part No. | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Cover End RPM [Max | 3525VQ35A21-11DD20 |
| Rotation | 3000 |
| Port Type | 3000 |
| Shaft End Pressure [Max | 31.5 |
| Port Orientation - Cover End | 52.5 |
| GPM @ 1,800 rpm, Cover End | w/o Integral Valves |
| Max. RPM [Max | Outlet 135° CW from Inlet |
| Pressure Port Size, Cover End | Outlet 90° CW from Inlet |
| Minor Diameter | 1 in Flange |
| Pressure Port Size, Shaft End | 1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) | 4.12 |
| Displacement Shaft End (cu in/revolution) | 6.88 |
2.438 Inch | 61.925 Millimeter x 4 Inch | 101.6 Millimeter x 2.75 Inch | 69.85 Millimeter SEALMASTER ERPB 207-C2 Pillow Block Bearings
SEALMASTER SC-11C Cartridge Unit Bearings
SEALMASTER MST-52 Take Up Unit Bearings
2.688 Inch | 68.275 Millimeter x 6.5 Inch | 165.1 Millimeter x 4.625 Inch | 117.475 Millimeter SEALMASTER SCHBD-43 Hanger Unit Bearings
2.438 Inch | 61.925 Millimeter x 3.375 Inch | 85.725 Millimeter x 3.25 Inch | 82.55 Millimeter SEALMASTER USRB5515E-207 Pillow Block Bearings
3.938 Inch | 100.025 Millimeter x 4.938 Inch | 125.425 Millimeter x 4.938 Inch | 125.425 Millimeter SEALMASTER USRB5522E-315-C Pillow Block Bearings