1.5 Inch | 38.1 Millimeter x 1.938 Inch | 49.225 Millimeter x 2.313 Inch | 58.75 Millimeter SEALMASTER EMP-24TC CR Pillow Block Bearings
How do 1.5 Inch | 38.1 Millimeter x 1.938 Inch | 49.225 Millimeter x 2.313 Inch | 58.75 Millimeter you find the 1.5 Inch | 38.1 Millimeter x 1.938 Inch | 49.225 Millimeter x 2.313 Inch | 58.75 Millimeter SEALMASTER EMP-24TC CR Pillow Block Bearings BEARING MEXICO,S.A.DE C.V. specification? Manufacturers 20.5 mm A4 Online Free check!
What is EMP-24TC CR bearing cross reference?
Brand Name: | SEALMASTER |
Model Number: | EMP-24TC CR |
Model No.: | 45.0 LB |
Port Size: | Flange Mount |
Mounting: | Left Hand (CCW) |
Controlled Flow Rate: | 2520VQ21A8-1DD20-LH |
Port Orientation - Shaft End: | 2 1/2 |
Major Diameter [Max: | Flange |
Relief Valve Setting: | 3/16 in |
Cover End Flow @ RPM: | Standard Pilot |
Product Details
Model No. | 45.0 LB |
Port Size | Flange Mount |
Mounting | Left Hand (CCW) |
Controlled Flow Rate | 2520VQ21A8-1DD20-LH |
Port Orientation - Shaft End | 2 1/2 |
Major Diameter [Max | Flange |
Relief Valve Setting | 3/16 in |
Cover End Flow @ RPM | Standard Pilot |
Minor Diameter [Min | 0.875 in |
Spline Description | Straight w/ Key |
Shaft Type | 2520VQ |
Rotation | 1 15/16 in |
Integral Valve Configuration | Buna-N |
Shaft End Pressure [Max | 2500 |
Shaft Key | N/A |
Max. RPM [Max | SAE B, 2 Bolt |
GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
Minor Diameter [Max | N/A |
Pressure Port Size, Cover End | 2700 |
Shaft End RPM [Max | 2500 |
Major Diameter [Min | N/A |
Shaft End Flow @ RPM | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Cover End RPM [Max | N/A |
Mounting Flange | N/A |
Seal Material | N/A |
Port Type | N/A |
Pump Series | N/A |
Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Weight | 2520VQ21A8-1DD20-LH |
Port Orientation - Cover End | 3000 |
Shaft Length | 3000 |
Shaft Seal Type | 12 |
Pilot Type | 31.5 |
Cover End Pressure [Max | w/o Integral Valves |
Manufacturer Part No. | Outlet 135° CW from Inlet |
Shaft Dia. | Outlet 90° CW from Inlet |
GPM @ 1,800 rpm, Cover End | 3/4 in Flange |
Pressure Port Size, Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 1.67 |
Displacement Shaft End (cu in/revolution) | 4.12 |