Vickers 3525V25A14-1CC-22R Double Vane Pump
Vickers 3525V25A14-1CC-22R Double Vane Pump Product Brochures , Bearings Category FYH BEARING UNITS Manufacturer Name Vickers Double Vane Pump Manufacturing Service . BEARING MEXICO,S.A.DE C.V. Get Your Free.
What is 3525V25A14-1CC-22R bearing cross reference？
| Brand Name: |
Vickers |
| Model Number: |
3525V25A14-1CC-22R |
| Max. RPM [Max: |
45.0 LB |
| Shaft End Pressure [Max: |
Flange Mount |
| Controlled Flow Rate: |
Left Hand (CCW) |
| Shaft Type: |
2520VQ21E11-11CC20-LH |
| Weight: |
2.5 |
| Major Diameter [Max: |
Flange |
| Minor Diameter [Min: |
N/A |
| Port Type: |
Standard Pilot |
Product Details
| Max. RPM [Max |
45.0 LB |
| Shaft End Pressure [Max |
Flange Mount |
| Controlled Flow Rate |
Left Hand (CCW) |
| Shaft Type |
2520VQ21E11-11CC20-LH |
| Weight |
2.5 |
| Major Diameter [Max |
Flange |
| Minor Diameter [Min |
N/A |
| Port Type |
Standard Pilot |
| Minor Diameter [Max |
0.875 in |
| Mounting Flange |
13 Tooth Splined |
| Shaft Length |
2520VQ |
| Spline Description |
1.375 in |
| Port Size |
Double |
| Mounting |
Buna-N |
| Cover End Pressure [Max |
2500 |
| Model No. |
0.715 in |
| Pilot Type |
SAE B, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Rotation |
16/32 |
| Cover End RPM [Max |
2700 |
| Minor Diameter |
2500 |
| Manufacturer Part No. |
N/A |
| Shaft End RPM [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
0.873 in |
| Major Diameter [Min |
0.872 in |
| Pump Series |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Shaft Seal Type |
N/A |
| Shaft Key |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
2520VQ21E11-11CC20-LH |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Relief Valve Setting |
3000 |
| Seal Material |
16.5 |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Pressure Port Size, Cover End |
1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.2 |
| Displacement Shaft End (cu in/revolution) |
4.1 |