QM INDUSTRIES TAFKP26K115SEO Flange Block Bearings
With over 25.7 kN C 10170 full-service stores, our QM INDUSTRIES TAFKP26K115SEO Flange Block Bearings inventory is extensive and our parts BEARING MEXICO,S.A.DE C.V. are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is TAFKP26K115SEO bearing cross reference？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
TAFKP26K115SEO |
| Minor Diameter [Max: |
45.0 LB |
| Cover End RPM [Max: |
Flange Mount |
| Relief Valve Setting: |
Right Hand (CW) |
| Cover End Flow @ RPM: |
2520VQ21E11-11DD20 |
| Cover End Pressure [Max: |
2 1/2 |
| Minor Diameter [Min: |
Flange |
| Shaft End Flow @ RPM: |
N/A |
| Port Size: |
Standard Pilot |
Product Details
| Minor Diameter [Max |
45.0 LB |
| Cover End RPM [Max |
Flange Mount |
| Relief Valve Setting |
Right Hand (CW) |
| Cover End Flow @ RPM |
2520VQ21E11-11DD20 |
| Cover End Pressure [Max |
2 1/2 |
| Minor Diameter [Min |
Flange |
| Shaft End Flow @ RPM |
N/A |
| Port Size |
Standard Pilot |
| Controlled Flow Rate |
0.875 in |
| Pilot Type |
13 Tooth Splined |
| Shaft Dia. |
2520VQ |
| Mounting Flange |
1 3/8 in |
| GPM @ 1,800 rpm, Cover End |
Buna-N |
| Mounting |
2500 |
| Displacement Shaft End (cu in/revolution) |
4.12 |
| Major Diameter [Max |
SAE B, 2 Bolt |
| Weight |
Single Shaft Seal |
| Shaft Seal Type |
16/32 |
| Port Type |
2700 |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Shaft End RPM [Max |
N/A |
| Manufacturer Part No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Minor Diameter |
0.873 in |
| Spline Description |
0.872 in |
| Model No. |
N/A |
| Integral Valve Configuration |
w/o Integral Valves |
| Shaft Key |
N/A |
| Shaft End Pressure [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
2520VQ21E11-11DD20 |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Rotation |
16.5 |
| Pressure Port Size, Cover End |
1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.22 |