2.5 Inch | 63.5 Millimeter x 4.09 Inch | 103.886 Millimeter x 3 Inch | 76.2 Millimeter QM INDUSTRIES QVVPXT14V208SB Pillow Block Bearings
Offer EX212G2 Designation of bearing High Quality Brand 2.5 Inch | 63.5 Millimeter x 4.09 Inch | 103.886 Millimeter x 3 Inch | 76.2 Millimeter QM INDUSTRIES QVVPXT14V208SB Pillow Block Bearings 2.5 Inch | 63.5 Millimeter x 4.09 Inch | 103.886 Millimeter x 3 Inch | 76.2 Millimeter .Contact BEARING MEXICO,S.A.DE C.V. Us Online to Get Best Quote.
What is QVVPXT14V208SB bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QVVPXT14V208SB |
| Displacement Shaft End (cu in/revolution): |
2.77 |
| GPM @ 1,800 rpm, Cover End: |
Flange Mount |
| Controlled Flow Rate: |
Right Hand (CW) |
| Manufacturer Part No.: |
2520VQ14C14-11DD20 |
| Integral Valve Configuration: |
w/o Integral Valves |
| Mounting: |
Flange |
| Cover End RPM [Max: |
N/A |
| Spline Description: |
Standard Pilot |
Product Details
| Displacement Shaft End (cu in/revolution) |
2.77 |
| GPM @ 1,800 rpm, Cover End |
Flange Mount |
| Controlled Flow Rate |
Right Hand (CW) |
| Manufacturer Part No. |
2520VQ14C14-11DD20 |
| Integral Valve Configuration |
w/o Integral Valves |
| Mounting |
Flange |
| Cover End RPM [Max |
N/A |
| Spline Description |
Standard Pilot |
| Cover End Flow @ RPM |
0.875 in |
| Minor Diameter [Min |
13 Tooth Splined |
| Model No. |
2520VQ |
| Shaft Dia. |
1.375 in |
| Mounting Flange |
Buna-N |
| Weight |
2700 |
| Relief Valve Setting |
0.715 in |
| Shaft Seal Type |
SAE B, 2 Bolt |
| Minor Diameter |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Major Diameter [Min |
2700 |
| Port Type |
2700 |
| Pilot Type |
N/A |
| Shaft End Flow @ RPM |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Shaft End Pressure [Max |
0.873 in |
| Port Size |
0.872 in |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Major Diameter [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Cover End Pressure [Max |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Rotation |
2520VQ14C14-11DD20 |
| GPM @ 1,800 rpm, Shaft End |
21 |
| Shaft Key |
3000 |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pressure Port Size, Cover End |
1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 5/16 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
2.8 |