2.938 Inch | 74.625 Millimeter x 3.29 Inch | 83.566 Millimeter x 3.5 Inch | 88.9 Millimeter QM INDUSTRIES QVPXT16V215SO Pillow Block Bearings
Offer 2.938 Inch | 74.625 Millimeter x 3.29 Inch | 83.566 Millimeter x 3.5 Inch | 88.9 Millimeter High Quality BEARING MEXICO,S.A.DE C.V. Brand 2.938 Inch | 74.625 Millimeter x 3.29 Inch | 83.566 Millimeter x 3.5 Inch | 88.9 Millimeter QM INDUSTRIES QVPXT16V215SO Pillow Block Bearings .Contact Us Online to Get Best Quote. 19 mm N1
What is QVPXT16V215SO bearing cross reference？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QVPXT16V215SO |
| Minor Diameter [Min: |
45.0 LB |
| Shaft End RPM [Max: |
Foot Mounted |
| Shaft Seal Type: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
4.1 |
| Pilot Type: |
2 1/2 |
| Port Size: |
Flange |
| Shaft Dia.: |
1/4 in |
| Port Type: |
Standard Pilot |
Product Details
| Minor Diameter [Min |
45.0 LB |
| Shaft End RPM [Max |
Foot Mounted |
| Shaft Seal Type |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
4.1 |
| Pilot Type |
2 1/2 |
| Port Size |
Flange |
| Shaft Dia. |
1/4 in |
| Port Type |
Standard Pilot |
| Major Diameter [Max |
0.875 in |
| Cover End Flow @ RPM |
Straight w/ Key |
| Weight |
2520V |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Mounting Flange |
Buna-N |
| Relief Valve Setting |
1800 |
| Shaft Key |
N/A |
| Shaft End Pressure [Max |
SAE B, 2 Bolt |
| Shaft End Flow @ RPM |
Single Shaft Seal |
| Minor Diameter [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
1800 |
| Cover End RPM [Max |
1800 |
| Integral Valve Configuration |
N/A |
| Rotation |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Cover End Pressure [Max |
N/A |
| Controlled Flow Rate |
N/A |
| Minor Diameter |
N/A |
| Model No. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Mounting |
2520V21A5F-1CC22R |
| Spline Description |
3000 |
| Major Diameter [Min |
2500 |
| Manufacturer Part No. |
7.5 |
| Pressure Port Size, Cover End |
3/4 in Code 61 |
| Pressure Port Size, Shaft End |
1 in Code 61 |
| Displacement Cover End (cu in/revolution) |
1.1 |