2.953 Inch | 75 Millimeter x 3.29 Inch | 83.566 Millimeter x 3.5 Inch | 88.9 Millimeter QM INDUSTRIES QVPXT16V075SEN Pillow Block Bearings
The online 2.953 Inch | 75 Millimeter x 3.29 Inch | 83.566 Millimeter x 3.5 Inch | 88.9 Millimeter QM INDUSTRIES QVPXT16V075SEN Pillow Block Bearings parts store gives you 3250 rpm Max Bearing Speed immediate access to a selection of more than 1.4 million new, BEARING MEXICO,S.A.DE C.V. used, remanufactured. 2.953 Inch | 75 Millimeter x 3.29 Inch | 83.566 Millimeter x 3.5 Inch | 88.9 Millimeter
What is QVPXT16V075SEN bearing cross reference？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QVPXT16V075SEN |
| Port Size: |
30.0 LB |
| Major Diameter [Min: |
Flange Mount |
| Rotation: |
Right Hand (CW) |
| Mounting Flange: |
V2010-1F13S1S-1CC12 |
| Minor Diameter [Min: |
1 1/2 |
| Minor Diameter: |
Flange |
| Port Orientation - Shaft End: |
Outlet Inline w/Inlet |
| Spline Description: |
N/A |
Product Details
| Port Size |
30.0 LB |
| Major Diameter [Min |
Flange Mount |
| Rotation |
Right Hand (CW) |
| Mounting Flange |
V2010-1F13S1S-1CC12 |
| Minor Diameter [Min |
1 1/2 |
| Minor Diameter |
Flange |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Spline Description |
N/A |
| Minor Diameter [Max |
0.875 in |
| Major Diameter [Max |
Straight w/ Key |
| Shaft Seal Type |
V2010 |
| Model No. |
2 5/16 in |
| Shaft End Pressure [Max |
Buna-N |
| Cover End RPM [Max |
2400 |
| Shaft End Flow @ RPM |
N/A |
| Mounting |
SAE B, 2 Bolt |
| Shaft Dia. |
Single Shaft Seal |
| Cover End Flow @ RPM |
N/A |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Shaft End RPM [Max |
2400 |
| Cover End Pressure [Max |
N/A |
| Displacement Shaft End (cu in/revolution) |
2.59 |
| GPM @ 1,800 rpm, Shaft End |
19.5 |
| Pilot Type |
N/A |
| Shaft Key |
N/A |
| Integral Valve Configuration |
N/A |
| Relief Valve Setting |
N/A |
| Port Type |
13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Controlled Flow Rate |
V2010-1F13S1S-1CC12 |
| Weight |
2500 |
| Manufacturer Part No. |
2200 |
| GPM @ 1,800 rpm, Cover End |
1.5 |
| Pressure Port Size, Cover End |
1/2 in SAE O-Ring |
| Pressure Port Size, Shaft End |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
0.2 |