6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings
Browse 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter 6 Inch | 152.4 Millimeter x 7.56 Inch | 192.024 Millimeter x 6.693 Inch | 170.002 Millimeter QM INDUSTRIES QMPG30J600SEN Pillow Block Bearings Categories in the Manufacturers Online BEARING MEXICO,S.A.DE C.V. Free. 4.5 mm A1 including QM INDUSTRIES Bearing.
What is QMPG30J600SEN bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QMPG30J600SEN |
| Minor Diameter [Max: |
45.0 LB |
| Manufacturer Part No.: |
Flange Mount |
| Model No.: |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution): |
4.12 |
| GPM @ 1,800 rpm, Shaft End: |
31.5 |
| Controlled Flow Rate: |
Flange |
| Integral Valve Configuration: |
w/o Integral Valves |
| Port Orientation - Cover End: |
Outlet 135° CCW from Inlet |
Product Details
| Minor Diameter [Max |
45.0 LB |
| Manufacturer Part No. |
Flange Mount |
| Model No. |
Left Hand (CCW) |
| Displacement Shaft End (cu in/revolution) |
4.12 |
| GPM @ 1,800 rpm, Shaft End |
31.5 |
| Controlled Flow Rate |
Flange |
| Integral Valve Configuration |
w/o Integral Valves |
| Port Orientation - Cover End |
Outlet 135° CCW from Inlet |
| Spline Description |
0.875 in |
| Shaft Dia. |
13 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
2520VQ |
| Mounting Flange |
1 3/8 in |
| Cover End Pressure [Max |
Buna-N |
| Shaft Seal Type |
2500 |
| Major Diameter [Min |
0.715 in |
| Mounting |
SAE B, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Weight |
2700 |
| Port Size |
2500 |
| Shaft End Pressure [Max |
N/A |
| Relief Valve Setting |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Orientation - Shaft End |
Outlet Inline w/Inlet |
| Rotation |
0.872 in |
| Minor Diameter |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Shaft Key |
N/A |
| Cover End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Major Diameter [Max |
2520VQ21A11-11CA20-LH |
| Cover End RPM [Max |
3000 |
| Port Type |
3000 |
| Minor Diameter [Min |
16.5 |
| Pressure Port Size, Cover End |
3/4 in Flange |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
2.22 |