6.693 Inch | 170 Millimeter x 8.43 Inch | 214.122 Millimeter x 7.5 Inch | 190.5 Millimeter QM INDUSTRIES QMPF34J170SN Pillow Block Bearings
Question6.693 Inch | 170 Millimeter x 8.43 Inch | 214.122 Millimeter x 7.5 Inch | 190.5 Millimeter QM INDUSTRIES QMPF34J170SN Pillow Block Bearings ? Find what you need faster by entering your BEARING MEXICO,S.A.DE C.V. 45 mm Da max QM INDUSTRIES Bearing information 6.693 Inch | 170 Millimeter x 8.43 Inch | 214.122 Millimeter x 7.5 Inch | 190.5 Millimeter .
What is QMPF34J170SN bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QMPF34J170SN |
| Minor Diameter: |
75.0 LB |
| Shaft End Flow @ RPM: |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End: |
45 |
| Manufacturer Part No.: |
3520VQ30E11-11DD20 |
| Cover End RPM [Max: |
3 |
| Rotation: |
Flange |
| Cover End Pressure [Max: |
N/A |
| Port Orientation - Shaft End: |
Outlet 90° CW from Inlet |
Product Details
| Minor Diameter |
75.0 LB |
| Shaft End Flow @ RPM |
Flange Mount |
| GPM @ 1,800 rpm, Shaft End |
45 |
| Manufacturer Part No. |
3520VQ30E11-11DD20 |
| Cover End RPM [Max |
3 |
| Rotation |
Flange |
| Cover End Pressure [Max |
N/A |
| Port Orientation - Shaft End |
Outlet 90° CW from Inlet |
| Pilot Type |
1.25 in |
| Minor Diameter [Min |
14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) |
6 |
| Integral Valve Configuration |
w/o Integral Valves |
| GPM @ 1,800 rpm, Cover End |
16.5 |
| Shaft Dia. |
Buna-N |
| Mounting Flange |
2500 |
| Controlled Flow Rate |
1.04 in |
| Shaft Key |
SAE C, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Spline Description |
12/24 |
| Cover End Flow @ RPM |
2500 |
| Major Diameter [Max |
2500 |
| Weight |
N/A |
| Model No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Min |
1.248 in |
| Shaft End RPM [Max |
1.247 in |
| Shaft End Pressure [Max |
N/A |
| Port Orientation - Cover End |
Outlet 135° CW from Inlet |
| Relief Valve Setting |
N/A |
| Mounting |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Port Type |
3520VQ30E11-11DD20 |
| Shaft Seal Type |
3000 |
| Minor Diameter [Max |
3000 |
| Pressure Port Size, Cover End |
1 1/16 in SAE O-Ring |
| Pressure Port Size, Shaft End |
1 1/4 in Flange |
| Displacement Cover End (cu in/revolution) |
2.2 |