1.75 Inch | 44.45 Millimeter x 2.875 Inch | 73.02 Millimeter x 2.25 Inch | 57.15 Millimeter QM INDUSTRIES QMP09J112SEN Pillow Block Bearings
Browse 1.75 Inch | 44.45 Millimeter x 2.875 Inch | 73.02 Millimeter x 2.25 Inch | 57.15 Millimeter QM INDUSTRIES QMP09J112SEN Pillow Block Bearings BEARING MEXICO,S.A.DE C.V. Categories in the Manufacturers Online Free. 1.75 Inch | 44.45 Millimeter x 2.875 Inch | 73.02 Millimeter x 2.25 Inch | 57.15 Millimeter 22 mm A1 including QM INDUSTRIES Bearing.
What is QMP09J112SEN bearing cross reference?
Brand Name: |
QM INDUSTRIES |
Model Number: |
QMP09J112SEN |
Integral Valve Configuration: |
w/o Integral Valves |
Shaft Dia.: |
Flange Mount |
Relief Valve Setting: |
Left Hand (CCW) |
Shaft End Pressure [Max: |
2520VQ21A11-1CC20LH |
GPM @ 1,800 rpm, Cover End: |
2 1/2 |
Port Type: |
Flange |
Shaft End RPM [Max: |
3/16 in |
Cover End RPM [Max: |
Standard Pilot |
Product Details
Integral Valve Configuration |
w/o Integral Valves |
Shaft Dia. |
Flange Mount |
Relief Valve Setting |
Left Hand (CCW) |
Shaft End Pressure [Max |
2520VQ21A11-1CC20LH |
GPM @ 1,800 rpm, Cover End |
2 1/2 |
Port Type |
Flange |
Shaft End RPM [Max |
3/16 in |
Cover End RPM [Max |
Standard Pilot |
Port Orientation - Cover End |
Outlet 45° CW from Inlet |
Major Diameter [Min |
Straight w/ Key |
Shaft End Flow @ RPM |
2520VQ |
Cover End Flow @ RPM |
1.9375 in |
Major Diameter [Max |
Buna-N |
Minor Diameter |
2500 |
Port Size |
N/A |
Manufacturer Part No. |
SAE B, 2 Bolt |
Shaft Key |
Single Shaft Seal |
Cover End Pressure [Max |
N/A |
Controlled Flow Rate |
2700 |
Model No. |
2500 |
Pilot Type |
N/A |
Minor Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Shaft Seal Type |
N/A |
Displacement Shaft End (cu in/revolution) |
4.12 |
Rotation |
N/A |
Port Orientation - Shaft End |
Outlet Inline w/Inlet |
GPM @ 1,800 rpm, Shaft End |
31.5 |
Spline Description |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Mounting |
2520VQ21A11-1CC20LH |
Minor Diameter [Min |
3000 |
Weight |
3000 |
Mounting Flange |
16.5 |
Pressure Port Size, Cover End |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
2.22 |