1.575 Inch | 40 Millimeter x 2.874 Inch | 73 Millimeter x 2.362 Inch | 60 Millimeter QM INDUSTRIES QASN09A040SB Pillow Block Bearings
With over 1.575 Inch | 40 Millimeter x 2.874 Inch | 73 Millimeter x 2.362 Inch | 60 Millimeter 10170 BEARING MEXICO,S.A.DE C.V. full-service stores, our 1.575 Inch | 40 Millimeter x 2.874 Inch | 73 Millimeter x 2.362 Inch | 60 Millimeter QM INDUSTRIES QASN09A040SB Pillow Block Bearings inventory Triple Lip Seal Type is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
What is QASN09A040SB bearing interchange？
| Brand Name: |
QM INDUSTRIES |
| Model Number: |
QASN09A040SB |
| Minor Diameter [Max: |
101.0 LB |
| Shaft End RPM [Max: |
Flange Mount |
| Shaft Seal Type: |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution): |
9.9 |
| Pilot Type: |
3 1/2 |
| Shaft End Flow @ RPM: |
Flange |
| Port Type: |
3/8 in |
| Model No.: |
Standard Pilot |
Product Details
| Minor Diameter [Max |
101.0 LB |
| Shaft End RPM [Max |
Flange Mount |
| Shaft Seal Type |
Right Hand (CW) |
| Displacement Shaft End (cu in/revolution) |
9.9 |
| Pilot Type |
3 1/2 |
| Shaft End Flow @ RPM |
Flange |
| Port Type |
3/8 in |
| Model No. |
Standard Pilot |
| Minor Diameter [Min |
1.5 in |
| Integral Valve Configuration |
w/o Integral Valves |
| Major Diameter [Min |
4525VQ |
| Cover End RPM [Max |
2 15/16 in |
| Spline Description |
Buna-N |
| Port Orientation - Cover End |
Outlet 45° CCW from Inlet |
| Port Size |
N/A |
| Shaft End Pressure [Max |
SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
| Shaft Dia. |
N/A |
| GPM @ 1,800 rpm, Shaft End |
75 |
| Rotation |
2200 |
| Controlled Flow Rate |
N/A |
| Minor Diameter |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
N/A |
| Major Diameter [Max |
N/A |
| Mounting |
N/A |
| Cover End Flow @ RPM |
N/A |
| Mounting Flange |
N/A |
| Weight |
50 gal/min @ 1200 rpm, 75 gal/min @ 1800 rpm |
| Shaft Key |
4525VQ50A21-86BB20 |
| Relief Valve Setting |
3000 |
| Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
| Cover End Pressure [Max |
31.5 |
| Pressure Port Size, Cover End |
1 in Flange |
| Pressure Port Size, Shaft End |
1 1/2 in Flange |
| Displacement Cover End (cu in/revolution) |
4.12 |