4.5 Inch | 114.3 Millimeter x 6.25 Inch | 158.75 Millimeter x 4.75 Inch | 120.65 Millimeter QM INDUSTRIES QAAPF22A408SM Pillow Block Bearings
4.5 Inch | 114.3 Millimeter x 6.25 Inch | 158.75 Millimeter x 4.75 Inch | 120.65 Millimeter QM INDUSTRIES QAAPF22A408SM Pillow Block Bearings Manufacturers , BEARING MEXICO,S.A.DE C.V. 4.5 Inch | 114.3 Millimeter x 6.25 Inch | 158.75 Millimeter x 4.75 Inch | 120.65 Millimeter Online 1.4375 in d Wholesale Suppliers !
What is QAAPF22A408SM bearing cross reference?
Brand Name: |
QM INDUSTRIES |
Model Number: |
QAAPF22A408SM |
Cover End Pressure [Max: |
75.0 LB |
Minor Diameter: |
Flange Mount |
Rotation: |
Left Hand (CCW) |
Shaft Dia.: |
3520VQ25A11-11CC20-LH |
Shaft End RPM [Max: |
3 |
Shaft Key: |
Flange |
Major Diameter [Min: |
N/A |
Relief Valve Setting: |
Standard Pilot |
Product Details
Cover End Pressure [Max |
75.0 LB |
Minor Diameter |
Flange Mount |
Rotation |
Left Hand (CCW) |
Shaft Dia. |
3520VQ25A11-11CC20-LH |
Shaft End RPM [Max |
3 |
Shaft Key |
Flange |
Major Diameter [Min |
N/A |
Relief Valve Setting |
Standard Pilot |
Spline Description |
1.25 in |
Displacement Shaft End (cu in/revolution) |
5 |
Manufacturer Part No. |
3520VQ |
Integral Valve Configuration |
w/o Integral Valves |
Mounting Flange |
Double |
Shaft End Flow @ RPM |
Buna-N |
GPM @ 1,800 rpm, Shaft End |
37.5 |
Cover End RPM [Max |
1.04 in |
Cover End Flow @ RPM |
SAE C, 2 Bolt |
Pilot Type |
Single Shaft Seal |
Controlled Flow Rate |
12/24 |
Port Size |
2500 |
Mounting |
2500 |
Shaft End Pressure [Max |
N/A |
Port Orientation - Cover End |
Outlet 45° CW from Inlet |
Weight |
1.248 in |
Port Type |
1.247 in |
Model No. |
N/A |
Port Orientation - Shaft End |
Outlet Inline w/Inlet |
Major Diameter [Max |
N/A |
Minor Diameter [Min |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End |
16.5 |
Minor Diameter [Max |
3000 |
Shaft Seal Type |
3000 |
Pressure Port Size, Cover End |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 1/4 in Flange |
Displacement Cover End (cu in/revolution) |
2.2 |