4 Inch | 101.6 Millimeter x 5.94 Inch | 150.876 Millimeter x 4.25 Inch | 107.95 Millimeter QM INDUSTRIES QAAPF20A400SEC Pillow Block Bearings
Our highly-skilled and factory-trained service experts have the resources to BEARING MEXICO,S.A.DE C.V. help you with all your 4 Inch | 101.6 Millimeter x 5.94 Inch | 150.876 Millimeter x 4.25 Inch | 107.95 Millimeter QM INDUSTRIES QAAPF20A400SEC Pillow Block Bearings needs - including routine maintenance, major repairs, warranty 4 Inch | 101.6 Millimeter x 5.94 Inch | 150.876 Millimeter x 4.25 Inch | 107.95 Millimeter service, and 208 kN C0 QM INDUSTRIES Bearing equipment inspections.
What is QAAPF20A400SEC bearing cross reference?
Brand Name: |
QM INDUSTRIES |
Model Number: |
QAAPF20A400SEC |
Rotation: |
45.0 LB |
GPM @ 1,800 rpm, Cover End: |
Flange Mount |
Mounting: |
Left Hand (CCW) |
Major Diameter [Max: |
2520VQ12A5-11BC20LH |
Port Orientation - Shaft End: |
Outlet 90° CCW from Inlet |
Shaft End Pressure [Max: |
Flange |
Relief Valve Setting: |
N/A |
Cover End Flow @ RPM: |
Standard Pilot |
Product Details
Rotation |
45.0 LB |
GPM @ 1,800 rpm, Cover End |
Flange Mount |
Mounting |
Left Hand (CCW) |
Major Diameter [Max |
2520VQ12A5-11BC20LH |
Port Orientation - Shaft End |
Outlet 90° CCW from Inlet |
Shaft End Pressure [Max |
Flange |
Relief Valve Setting |
N/A |
Cover End Flow @ RPM |
Standard Pilot |
Shaft End Flow @ RPM |
0.875 in |
Pilot Type |
13 Tooth Splined |
Port Size |
2520VQ |
Major Diameter [Min |
1 3/8 in |
Manufacturer Part No. |
Buna-N |
Integral Valve Configuration |
w/o Integral Valves |
Cover End Pressure [Max |
0.715 in |
Port Type |
SAE B, 2 Bolt |
Controlled Flow Rate |
Single Shaft Seal |
Minor Diameter [Max |
16/32 |
Minor Diameter [Min |
2700 |
Shaft Dia. |
2700 |
Shaft Key |
N/A |
Spline Description |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Mounting Flange |
0.873 in |
Minor Diameter |
0.872 in |
Weight |
N/A |
Shaft End RPM [Max |
N/A |
Cover End RPM [Max |
N/A |
Model No. |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Port Orientation - Cover End |
Outlet 45° CW from Inlet |
GPM @ 1,800 rpm, Shaft End |
18 |
Displacement Shaft End (cu in/revolution) |
2.45 |
Shaft Seal Type |
7.5 |
Pressure Port Size, Cover End |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
1.1 |