2.362 Inch | 60 Millimeter x 2.56 Inch | 65.024 Millimeter x 2.5 Inch | 63.5 Millimeter QM INDUSTRIES DVP13K060SN Pillow Block Bearings
Online shopping BEARING MEXICO,S.A.DE C.V. 2.362 Inch | 60 Millimeter x 2.56 Inch | 65.024 Millimeter x 2.5 Inch | 63.5 Millimeter QM INDUSTRIES DVP13K060SN Pillow Block Bearings from 11.8 mm S a 2.362 Inch | 60 Millimeter x 2.56 Inch | 65.024 Millimeter x 2.5 Inch | 63.5 Millimeter great selection at Store. ... QM INDUSTRIES Bearing Accessories.
What is DVP13K060SN bearing interchange?
Brand Name: |
QM INDUSTRIES |
Model Number: |
DVP13K060SN |
Shaft Dia.: |
45.0 LB |
Minor Diameter [Min: |
Flange Mount |
Model No.: |
Left Hand (CCW) |
Port Size: |
2520VQ21A8-1CC20-LH |
Port Type: |
2 1/2 |
Shaft End Pressure [Max: |
Flange |
Mounting Flange: |
3/16 in |
Shaft Seal Type: |
Standard Pilot |
Product Details
Shaft Dia. |
45.0 LB |
Minor Diameter [Min |
Flange Mount |
Model No. |
Left Hand (CCW) |
Port Size |
2520VQ21A8-1CC20-LH |
Port Type |
2 1/2 |
Shaft End Pressure [Max |
Flange |
Mounting Flange |
3/16 in |
Shaft Seal Type |
Standard Pilot |
Rotation |
0.875 in |
Cover End RPM [Max |
Straight w/ Key |
Spline Description |
2520VQ |
Cover End Pressure [Max |
1 15/16 in |
Weight |
Buna-N |
GPM @ 1,800 rpm, Cover End |
2500 |
Minor Diameter |
N/A |
Displacement Shaft End (cu in/revolution) |
4.12 |
Major Diameter [Min |
Single Shaft Seal |
Port Orientation - Cover End |
Outlet 45° CW from Inlet |
Shaft End RPM [Max |
2700 |
GPM @ 1,800 rpm, Shaft End |
31.5 |
Pilot Type |
N/A |
Controlled Flow Rate |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Mounting |
N/A |
Integral Valve Configuration |
w/o Integral Valves |
Major Diameter [Max |
N/A |
Shaft End Flow @ RPM |
N/A |
Port Orientation - Shaft End |
Outlet Inline w/Inlet |
Minor Diameter [Max |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Key |
2520VQ21A8-1CC20-LH |
Manufacturer Part No. |
3000 |
Relief Valve Setting |
3000 |
Cover End Flow @ RPM |
12 |
Pressure Port Size, Cover End |
3/4 in Flange |
Pressure Port Size, Shaft End |
1 in Flange |
Displacement Cover End (cu in/revolution) |
1.67 |