SKF E2.6002-2Z/C3 Single Row Ball Bearings
With over Deep Groove Ball Bea Bearing Used 10170 full-service stores, our SKF E2.6002-2Z/C3 Single Row Ball Bearings inventory is BEARING MEXICO,S.A.DE C.V. extensive and our parts are priced right. within 24 hours. This helps 6 Bearing I.D. d(mm) you maximize your productivity by saving time and your hard-earned dollars.
What is E2.6002-2Z/C3 bearing cross reference?
Brand Name: | SKF |
Model Number: | E2.6002-2Z/C3 |
Model No.: | 76.0 LB |
Spline Description: | Flange Mount |
Manufacturer Part No.: | Right Hand (CW) |
Shaft End Pressure [Max: | 3525VQ30A21-11BB20 |
Major Diameter [Min: | 3 |
Pump Series: | Flange |
Displacement Shaft End (cu in/revolution): | 5.96 |
Minor Diameter [Max: | Standard Pilot |
Product Details
Model No. | 76.0 LB |
Spline Description | Flange Mount |
Manufacturer Part No. | Right Hand (CW) |
Shaft End Pressure [Max | 3525VQ30A21-11BB20 |
Major Diameter [Min | 3 |
Pump Series | Flange |
Displacement Shaft End (cu in/revolution) | 5.96 |
Minor Diameter [Max | Standard Pilot |
Shaft Seal Type | 1.25 in |
Shaft Dia. | 14 Tooth Splined |
Cover End Flow @ RPM | 3525VQ |
Minor Diameter [Min | 1 15/16 in |
Minor Diameter | Buna-N |
Cover End RPM [Max | 2500 |
Rotation | 1.04 in |
Max. RPM [Max | SAE C, 2 Bolt |
Port Size | Single Shaft Seal |
Relief Valve Setting | 12/24 |
Mounting Flange | 2500 |
Seal Material | 2500 |
Pilot Type | N/A |
Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Key | 1.248 in |
Shaft End Flow @ RPM | 1.247 in |
Port Type | N/A |
Shaft End RPM [Max | N/A |
Controlled Flow Rate | N/A |
Cover End Pressure [Max | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Shaft Type | 3525VQ30A21-11BB20 |
Weight | 3000 |
Mounting | 3000 |
Major Diameter [Max | 31.5 |
GPM @ 1,800 rpm, Shaft End | 45 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 45° CCW from Inlet |
Port Orientation - Shaft End | Outlet 90° CCW from Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.12 |