2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 0.787 Inch | 20 Millimeter SKF 7015 ACDGA/P4A Precision Ball Bearings
The online 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 0.787 Inch | 20 Millimeter SKF 7015 ACDGA/P4A Precision Ball Bearings BEARING MEXICO,S.A.DE C.V. parts store gives you 2.953 Inch | 75 Millimeter x 4.528 Inch | 115 Millimeter x 0.787 Inch | 20 Millimeter immediate access to 163 mm L a selection of more than 1.4 million new, used, remanufactured.
What is 7015 ACDGA/P4A bearing cross reference?
Brand Name: | SKF |
Model Number: | 7015 ACDGA/P4A |
Manufacturer Part No.: | 45.0 LB |
Cover End RPM [Max: | Flange Mount |
Mounting: | Left Hand (CCW) |
Shaft Type: | 2520VQ12A5-11CC20LH |
Shaft Key: | 2.5 |
Weight: | Flange |
Mounting Flange: | N/A |
Minor Diameter: | Standard Pilot |
Product Details
Manufacturer Part No. | 45.0 LB |
Cover End RPM [Max | Flange Mount |
Mounting | Left Hand (CCW) |
Shaft Type | 2520VQ12A5-11CC20LH |
Shaft Key | 2.5 |
Weight | Flange |
Mounting Flange | N/A |
Minor Diameter | Standard Pilot |
Shaft End Flow @ RPM | 0.875 in |
Relief Valve Setting | 13 Tooth Splined |
Pilot Type | 2520VQ |
Cover End Pressure [Max | 1 3/8 in |
Seal Material | Double |
Pump Series | Buna-N |
Displacement Shaft End (cu in/revolution) | 2.5 |
Shaft End RPM [Max | 0.715 in |
Minor Diameter [Max | SAE B, 2 Bolt |
Max. RPM [Max | Single Shaft Seal |
Spline Description | 16/32 |
Port Size | 2700 |
Shaft Dia. | 2700 |
Cover End Flow @ RPM | N/A |
Shaft End Pressure [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Model No. | 0.873 in |
Port Type | 0.872 in |
Major Diameter [Max | N/A |
Major Diameter [Min | N/A |
Rotation | N/A |
Minor Diameter [Min | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Shaft Length | 2520VQ12A5-11CC20LH |
Shaft Seal Type | 3000 |
Controlled Flow Rate | 3000 |
GPM @ 1,800 rpm, Cover End | 7.5 |
GPM @ 1,800 rpm, Shaft End | 18 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 45° CW from Inlet |
Port Orientation - Shaft End | Outlet Inline w/Inlet |
Pressure Port Size, Cover End | 3/4 in Flange |
Pressure Port Size, Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 1.1 |