1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MZZ Angular Contact Ball Bearings
1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF 5310MZZ Angular Contact Ball Bearings Needs Analysis , 1.969 Inch | 50 Millimeter x 4.331 Inch | 110 Millimeter x 1.748 Inch | 44.4 Millimeter SKF Bearing Manufacturing Service . Get Your BEARING MEXICO,S.A.DE C.V. 63.5 mm B - Cone Width Free.
What is 5310MZZ bearing cross reference?
Brand Name: | SKF |
Model Number: | 5310MZZ |
Max. RPM [Max: | 76.0 LB |
Displacement Shaft End (cu in/revolution): | 5.96 |
Port Size: | Right Hand (CW) |
Pilot Type: | 3525VQ30A12-11AA20 |
Shaft End Pressure [Max: | 3 |
Minor Diameter [Min: | Flange |
Port Type: | N/A |
Spline Description: | Standard Pilot |
Product Details
Max. RPM [Max | 76.0 LB |
Displacement Shaft End (cu in/revolution) | 5.96 |
Port Size | Right Hand (CW) |
Pilot Type | 3525VQ30A12-11AA20 |
Shaft End Pressure [Max | 3 |
Minor Diameter [Min | Flange |
Port Type | N/A |
Spline Description | Standard Pilot |
Weight | 1.25 in |
Minor Diameter | 14 Tooth Splined |
Shaft Type | 3525VQ |
Shaft Key | 1 15/16 in |
Rotation | Buna-N |
Seal Material | 2500 |
Mounting | 1.04 in |
Minor Diameter [Max | SAE C, 2 Bolt |
Shaft Dia. | Single Shaft Seal |
Major Diameter [Max | 12/24 |
Mounting Flange | 2500 |
Pump Series | 2500 |
Cover End Pressure [Max | N/A |
Model No. | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Relief Valve Setting | 1.248 in |
Shaft End Flow @ RPM | 1.247 in |
Shaft End RPM [Max | N/A |
Manufacturer Part No. | N/A |
Cover End Flow @ RPM | N/A |
Major Diameter [Min | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Shaft Seal Type | 3525VQ30A12-11AA20 |
Cover End RPM [Max | 3000 |
Controlled Flow Rate | 3000 |
Shaft Length | 18 |
GPM @ 1,800 rpm, Shaft End | 45 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CCW from Inlet |
Port Orientation - Shaft End | Outlet Opposite Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 2.45 |