@@@@@@@@ | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | F | S | D | A | d | Y | H | L |
| HJ-263520+IR-222620 | NSK | - | - | 55,562 mm | - | 34,925 mm | - | - | - |
| SDAF 22620 | TIMKEN | 4.125 in | - | 2.2500 in | 5.2500 in | 3.438 Inch | 87.325 Millimeter | 2.2969 in | - | - |
| SDAF 22620 X 3 3/8 | TIMKEN | - | - | 7.375 Inch | 187.325 Millimeter | - | 3.375 Inch | 85.725 Millimeter | - | - | - |
| SDAF 22620 X 3 1/2 | TIMKEN | - | - | 7.375 Inch | 187.325 Millimeter | - | 3.5 Inch | 88.9 Millimeter | - | - | - |
| SDAF 22620X 3 5/16 | TIMKEN | - | - | 7.375 Inch | 187.325 Millimeter | - | 3.313 Inch | 84.15 Millimeter | - | - | - |
| SAF 22620 | SKF | - | 4.763 mm | 7.313 Inch | 185.75 Millimeter | - | 3.438 Inch | 87.325 Millimeter | - | 258.762 mm | 419.1 mm |
| SAF 22620 X 3 1/2 | TIMKEN | - | - | 7.375 Inch | 187.325 Millimeter | - | 3.5 Inch | 88.9 Millimeter | - | - | - |
| SAF 22620 X 3 5/16 | TIMKEN | - | - | 7.375 Inch | 187.325 Millimeter | - | 3.313 Inch | 84.15 Millimeter | - | - | - |
| SAF 22620 X 3 3/8 | TIMKEN | - | - | 7.375 Inch | 187.325 Millimeter | - | 3.375 Inch | 85.725 Millimeter | - | - | - |
| EP-222620 | ISOSTATIC | - | - | 1.25 Inch | 31.75 Millimeter | - | 1.379 Inch | 35.027 Millimeter | - | - | - |
| SAF 22620 03-07 | MIETHER BEARING PROD | - | - | - | - | - | - | - | - |
| 4.688 Inch | 119.075 Millimeter x 4.5 Inch | 114.3 Millimeter x 7.126 Inch | 181 Millimeter TIMKEN MSE411BXHSATL Pillow Block Bearings | Shaft End Flow @ RPM:30.0 LB; Cover End Pressure [Max:Flange Mount; Spline Description:Left Hand (CCW); Mounting:V2010-1F13S6S-1CC12-LH; Port Size:1 1/2; Major Diameter [Min:Flange; Shaft Seal Type:3/16 in; Relief Valve Setting:N/A; Port Orientation - Shaft End:0.875 in; Shaft End RPM [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 10.5 Inch | 266.7 Millimeter x 15.375 Inch | 390.525 Millimeter x 12 Inch | 304.8 Millimeter TIMKEN SDAF 23156KX10 1/2 Pillow Block Bearings | Cover End RPM [Max:30.0 LB; Shaft Seal Type:Flange Mount; Rotation:Left Hand (CCW); Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Shaft End Pressure [Max:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Shaft End RPM [Max:3/16 in; Port Type:N/A; Spline Description:0.875 in; Controlled Flow Rate:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 2.362 Inch | 60 Millimeter x 3.346 Inch | 85 Millimeter x 1.535 Inch | 39 Millimeter TIMKEN 2MM9312WI TUL Precision Ball Bearings | GPM @ 1,800 rpm, Shaft End:30.0 LB; Port Orientation - Shaft End:Flange Mount; Spline Description:Left Hand (CCW); Mounting:V2010-1F13S6S-1CC12-LH; Port Size:1 1/2; Model No.:Flange; Cover End RPM [Max:3/16 in; Manufacturer Part No.:N/A; Controlled Flow Rate:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 5.234 Inch | 132.944 Millimeter x 7.874 Inch | 200 Millimeter x 2.75 Inch | 69.85 Millimeter TIMKEN 5222-WS Cylindrical Roller Bearings | Major Diameter [Max:30.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Port Orientation - Cover End:Left Hand (CCW); Cover End RPM [Max:V2010-1F13S6S-1CC12-LH; Minor Diameter [Max:1 1/2; Cover End Pressure [Max:Flange; Port Type:3/16 in; Integral Valve Configuration:N/A; Minor Diameter [Min:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| TIMKEN 81590-50030/81962-50039 Tapered Roller Bearing Assemblies | Shaft End RPM [Max:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Major Diameter [Min:Left Hand (CCW); Minor Diameter [Max:V2010-1F13S6S-1CC12-LH; Relief Valve Setting:1 1/2; Shaft Seal Type:Flange; Displacement Shaft End (cu in/revolution):3/16 in; Cover End Pressure [Max:N/A; Port Orientation - Shaft End:0.875 in; Spline Description:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 5.906 Inch | 150 Millimeter x 8.858 Inch | 225 Millimeter x 4.134 Inch | 105 Millimeter TIMKEN 2MM9130WI TUL Precision Ball Bearings | Shaft End Flow @ RPM:30.0 LB; Minor Diameter [Min:Flange Mount; Minor Diameter [Max:Left Hand (CCW); Cover End RPM [Max:V2010-1F13S6S-1CC12-LH; Port Size:1 1/2; Major Diameter [Min:Flange; Displacement Shaft End (cu in/revolution):3/16 in; Displacement Cover End (cu in/revolution):N/A; Controlled Flow Rate:0.875 in; Cover End Pressure [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 34,925 mm x 72 mm x 41,28 mm TIMKEN GC1106KRRB Insert Bearings Spherical OD | Major Diameter [Max:30.0 LB; Model No.:Flange Mount; Minor Diameter [Min:Left Hand (CCW); Port Size:V2010-1F13S6S-1CC12-LH; Cover End Flow @ RPM:1 1/2; Weight:Flange; Controlled Flow Rate:3/16 in; Cover End RPM [Max:N/A; Port Orientation - Cover End:0.875 in; Relief Valve Setting:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 2.75 Inch | 69.85 Millimeter x 0 Inch | 0 Millimeter x 1 Inch | 25.4 Millimeter TIMKEN 29675-3 Tapered Roller Bearings | GPM @ 1,800 rpm, Cover End:30.0 LB; Port Type:Flange Mount; Model No.:Left Hand (CCW); Weight:V2010-1F13S6S-1CC12-LH; Displacement Cover End (cu in/revolution):1 1/2; Mounting:Flange; Controlled Flow Rate:3/16 in; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:0.875 in; Shaft End Flow @ RPM:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| TIMKEN E-4BF-TRB-1 3/4 Flange Block Bearings | GPM @ 1,800 rpm, Cover End:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Port Orientation - Shaft End:Left Hand (CCW); Model No.:V2010-1F13S6S-1CC12-LH; Port Type:1 1/2; Controlled Flow Rate:Flange; Port Size:3/16 in; Shaft Seal Type:N/A; Minor Diameter [Min:0.875 in; Manufacturer Part No.:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
| 0 Inch | 0 Millimeter x 15 Inch | 381 Millimeter x 2.25 Inch | 57.15 Millimeter TIMKEN 126150-3 Tapered Roller Bearings | Relief Valve Setting:30.0 LB; Controlled Flow Rate:Flange Mount; GPM @ 1,800 rpm, Shaft End:Left Hand (CCW); Port Type:V2010-1F13S6S-1CC12-LH; Model No.:1 1/2; Spline Description:Flange; Shaft End Pressure [Max:3/16 in; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter [Max:0.875 in; Major Diameter [Max:Straight w/ Key; Pump Series:V2010; Shaft Length:2.3125 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:N/A; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F13S6S-1CC12-LH; Cover End Pressure [Max:2200; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:9; GPM @ 1,800 rpm, Shaft End:19.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 45° CW from Inlet; Port Orientation - Shaft End:Outlet Inline w/Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):1.19; Displacement Shaft End (cu in/revolution):2.59; |
3.313 Inch | 84.15 Millimeter x 7.375 Inch | 187.325 Millimeter x 5.25 Inch | 133.35 Millimeter TIMKEN SAF 22620 X 3 5/16 Pillow Block Bearings Video
Timken Engineered Bearings | The Timken Company
Our tapered, spherical, cylindrical, thrust, ball, plain, miniature, precision and
Tapered Roller Bearings | The Timken Company
Inch Single Row. Single-row tapered roller bearings are the most basic and
Bearing Search | The Timken Company
New Search Search for a bearing and then navigate to Tolerances, Periodic
Precision Bearings | The Timken Company
Our extensive range of Timken® precision bearing assemblies, designed for the
The Timken Company | Engineered Bearings & Mechanical
The Timken Company designs a growing portfolio of engineered bearings and power transmission products. With more than a century of knowledge and