C13 China Factory Dump Truck Gear Structure Engine Oil Pump 2335220
| Shaft Type: | 18.0 LB |
| Port Orientation - Shaft End: | Flange Mount |
| Major Diameter [Min: | Right Hand (CW) |
| Displacement Cover End (cu in/revolution): | 7 gal/min @ 1200 rpm |
| Controlled Flow Rate: | SAE-20 |
| Cover End Pressure [Max: | SAE |
| Major Diameter [Max: | N/A |
| Integral Valve Configuration: | 11 |
Product Details
| Shaft Type | 18.0 LB |
| Port Orientation - Shaft End | Flange Mount |
| Major Diameter [Min | Right Hand (CW) |
| Displacement Cover End (cu in/revolution) | 7 gal/min @ 1200 rpm |
| Controlled Flow Rate | SAE-20 |
| Cover End Pressure [Max | SAE |
| Major Diameter [Max | N/A |
| Integral Valve Configuration | 11 |
| Port Type | 7 gpm @ 1200 rpm |
| Model No. | 0.625 in |
| Port Orientation - Cover End | 9 Tooth Splined |
| Shaft End Pressure [Max | 11 / 1800 |
| Spline Description | V20 |
| Manufacturer Part No. | 1.25 in |
| GPM @ 1,800 rpm, Cover End | Single |
| Shaft Dia. | SAE-12 |
| Minor Diameter [Max | Buna-N |
| Shaft Seal Type | 3000 |
| Max. RPM [Max | 2500 psi |
| Shaft Key | 10 1/2 |
| Minor Diameter | S |
| Port Size | SAE A, 2 Bolt |
| Pump Series | S |
| Relief Valve Setting | 1 |
| Mounting Flange | Opposite Inlet Port |
| Seal Material | 1.4 |
| Shaft End Flow @ RPM | w/o Integral Valves |
| Shaft Length | 62A |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump