3P6816 eaton cheap fuel gear pump Fit Cat D6D D6D SR 3P-6816
| Controlled Flow Rate: | 18.0 LB |
| Pressure Port Size, Cover End: | Flange Mount |
| Integral Valve Configuration: | Right Hand (CW) |
| Cover End RPM [Max: | 9 gal/min @ 1200 rpm |
| Port Orientation - Cover End: | SAE-20 |
| Minor Diameter [Max: | SAE |
| Spline Description: | 3/16 in |
| Major Diameter [Max: | 11 |
| PDF |
|
Product Details
| Controlled Flow Rate | 18.0 LB |
| Pressure Port Size, Cover End | Flange Mount |
| Integral Valve Configuration | Right Hand (CW) |
| Cover End RPM [Max | 9 gal/min @ 1200 rpm |
| Port Orientation - Cover End | SAE-20 |
| Minor Diameter [Max | SAE |
| Spline Description | 3/16 in |
| Major Diameter [Max | 11 |
| Port Orientation - Shaft End | 9 gpm @ 1200 rpm |
| Shaft Key | 0.75 in |
| Model No. | Straight w/ Key |
| Mounting Flange | 13.5 gpm @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | V20 |
| Pilot Type | 2.66 in |
| Pump Series | Double |
| Major Diameter [Min | SAE-12 |
| Cover End Pressure [Max | Viton |
| Port Type | 2800 |
| Shaft Length | 2500 psi |
| Pressure Port Size, Shaft End | 13 1/2 |
| Cover End Flow @ RPM | S |
| Max. RPM [Max | SAE A, 2 Bolt |
| Seal Material | S |
| Relief Valve Setting | 1 |
| Displacement Cover End (cu in/revolution) | Inline w/ Inlet |
| Shaft Type | 1.8 |
| Manufacturer Part No. | w/o Integral Valves |
| Minor Diameter | 1C |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump