D75A-1 D65S-6/7/8 D65A-6/8/11 Wheel Loader Hydraulic Gear Pump 07430-72203
Pump Series: | 76.0 LB |
Mounting: | Flange Mount |
Seal Material: | Left Hand (CCW) |
Minor Diameter: | 1.04 in |
Max. RPM [Max: | 3 |
Model No.: | Flange |
Weight: | N/A |
Pilot Type: | Standard Pilot |
PDF |
|
Product Details
Pump Series | 76.0 LB |
Mounting | Flange Mount |
Seal Material | Left Hand (CCW) |
Minor Diameter | 1.04 in |
Max. RPM [Max | 3 |
Model No. | Flange |
Weight | N/A |
Pilot Type | Standard Pilot |
Port Type | 1.25 in |
Port Size | 14 Tooth Splined |
Shaft Key | 3525VQ |
Rotation | 1.9375 in |
Shaft Type | Double |
Shaft Length | Buna-N |
Shaft Dia. | 2400 |
Mounting Flange | SAE C, 2 Bolt |
Shaft Seal Type | Single Shaft Seal |
Spline Description | 12/24 |
Cover End RPM [Max | 2500 |
Shaft End RPM [Max | 2400 |
Controlled Flow Rate | N/A |
Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Major Diameter [Max | 1.248 in |
Major Diameter [Min | 1.247 in |
Minor Diameter [Max | N/A |
Minor Diameter [Min | N/A |
Relief Valve Setting | N/A |
Shaft End Flow @ RPM | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Manufacturer Part No. | 3525VQ38A21-11AA20-LH |
Cover End Pressure [Max | 3000 |
Shaft End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 31.5 |
GPM @ 1,800 rpm, Shaft End | 57 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CCW from Inlet |
Port Orientation - Shaft End | Outlet Opposite Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.1 |
Displacement Shaft End (cu in/revolution) | 7.4 |