Excavator NH220 Diesel Engine D85 Water Pump 6685-61-1024 BM76506
Integral Valve Configuration: | 45.0 LB |
Minor Diameter [Max: | Flange Mount |
Rotation: | Right Hand (CW) |
Mounting: | 2520VQ12A5-11DD20 |
Seal Material: | 2 1/2 |
Shaft Seal Type: | Flange |
GPM @ 1,800 rpm, Cover End: | N/A |
Controlled Flow Rate: | Standard Pilot |
PDF |
|
Product Details
Integral Valve Configuration | 45.0 LB |
Minor Diameter [Max | Flange Mount |
Rotation | Right Hand (CW) |
Mounting | 2520VQ12A5-11DD20 |
Seal Material | 2 1/2 |
Shaft Seal Type | Flange |
GPM @ 1,800 rpm, Cover End | N/A |
Controlled Flow Rate | Standard Pilot |
Port Type | 0.875 in |
Shaft End Pressure [Max | 13 Tooth Splined |
Mounting Flange | 2520VQ |
Minor Diameter [Min | 1 3/8 in |
Cover End Pressure [Max | Buna-N |
Relief Valve Setting | 2700 |
Port Orientation - Shaft End | 0.715 in |
Major Diameter [Max | SAE B, 2 Bolt |
Major Diameter [Min | Single Shaft Seal |
Pressure Port Size, Cover End | 16/32 |
GPM @ 1,800 rpm, Shaft End | 2700 |
Port Orientation - Cover End | 2700 |
Displacement Cover End (cu in/revolution) | N/A |
Shaft End RPM [Max | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Cover End RPM [Max | 0.873 in |
Pilot Type | 0.872 in |
Model No. | N/A |
Weight | N/A |
Cover End Flow @ RPM | N/A |
Pressure Port Size, Shaft End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 2520VQ12A5-11DD20 |
Spline Description | 3000 |
Port Size | 3000 |
Shaft End Flow @ RPM | 7.5 |
Max. RPM [Max | 18 |
Shaft Key | w/o Integral Valves |
Pump Series | Outlet 135° CW from Inlet |
Minor Diameter | Outlet 90° CW from Inlet |
Shaft Dia. | 3/4 in Flange |
Manufacturer Part No. | 1 in Flange |
Shaft Type | 1.1 |
Shaft Length | 2.45 |