Hydraulic Gear Pump 705-41-08070 for Excavator PC15-3/PC10-7/PC20-7
Rotation: | 76.0 LB |
Minor Diameter [Min: | Flange Mount |
Shaft Key: | Right Hand (CW) |
Pump Series: | 3525VQ35A21-1CC20 |
Controlled Flow Rate: | 3 |
Pressure Port Size, Shaft End: | Flange |
GPM @ 1,800 rpm, Shaft End: | 5/16 in |
Max. RPM [Max: | Standard Pilot |
PDF |
|
Product Details
Rotation | 76.0 LB |
Minor Diameter [Min | Flange Mount |
Shaft Key | Right Hand (CW) |
Pump Series | 3525VQ35A21-1CC20 |
Controlled Flow Rate | 3 |
Pressure Port Size, Shaft End | Flange |
GPM @ 1,800 rpm, Shaft End | 5/16 in |
Max. RPM [Max | Standard Pilot |
Minor Diameter | 1.25 in |
Shaft End Flow @ RPM | Straight w/ Key |
Weight | 3525VQ |
Major Diameter [Min | 2.5 in |
Cover End Flow @ RPM | Double |
Pressure Port Size, Cover End | Buna-N |
Spline Description | 2400 |
Cover End RPM [Max | N/A |
Mounting Flange | SAE C, 2 Bolt |
Shaft End Pressure [Max | Single Shaft Seal |
Shaft Type | N/A |
GPM @ 1,800 rpm, Cover End | 2500 |
Relief Valve Setting | 2400 |
Minor Diameter [Max | N/A |
Displacement Cover End (cu in/revolution) | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Integral Valve Configuration | N/A |
Mounting | N/A |
Port Orientation - Cover End | N/A |
Port Type | N/A |
Manufacturer Part No. | N/A |
Major Diameter [Max | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Seal Material | 3525VQ35A21-1CC20 |
Cover End Pressure [Max | 3000 |
Shaft Seal Type | 3000 |
Port Orientation - Shaft End | 31.5 |
Shaft End RPM [Max | 52.5 |
Pilot Type | w/o Integral Valves |
Port Size | Outlet 45° CW from Inlet |
Shaft Length | Outlet Inline w/Inlet |
Displacement Shaft End (cu in/revolution) | 6.9 |
Model No. | 1 1/4 in Flange |
Shaft Dia. | 4.1 |