Excavator PC160-7 Hydraulic Main Pump Parts 708-3M-04161 Swash Plate
Minor Diameter [Max: | 76.0 LB |
Rotation: | Flange Mount |
Spline Description: | Right Hand (CW) |
Shaft Length: | 3525VQ35A21-11DD20 |
Seal Material: | 3 |
Minor Diameter: | Flange |
Major Diameter [Max: | N/A |
Pilot Type: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max | 76.0 LB |
Rotation | Flange Mount |
Spline Description | Right Hand (CW) |
Shaft Length | 3525VQ35A21-11DD20 |
Seal Material | 3 |
Minor Diameter | Flange |
Major Diameter [Max | N/A |
Pilot Type | Standard Pilot |
Shaft Type | 1.25 in |
Port Size | 14 Tooth Splined |
Major Diameter [Min | 3525VQ |
Model No. | 1.9375 in |
Mounting | Buna-N |
Shaft Dia. | 2400 |
Pump Series | 1.04 in |
Shaft End RPM [Max | SAE C, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
Shaft Seal Type | 12/24 |
Shaft Key | 2500 |
Minor Diameter [Min | 2400 |
Weight | N/A |
Mounting Flange | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Port Type | 1.248 in |
Cover End RPM [Max | 1.247 in |
Max. RPM [Max | N/A |
Relief Valve Setting | N/A |
Cover End Flow @ RPM | N/A |
Shaft End Flow @ RPM | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Manufacturer Part No. | 3525VQ35A21-11DD20 |
Cover End Pressure [Max | 3000 |
Shaft End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 31.5 |
GPM @ 1,800 rpm, Shaft End | 52.5 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CW from Inlet |
Port Orientation - Shaft End | Outlet 90° CW from Inlet |
Pressure Port Size, Cover End | 1 in Flange |
Pressure Port Size, Shaft End | 1 1/4 in Flange |
Displacement Cover End (cu in/revolution) | 4.12 |
Displacement Shaft End (cu in/revolution) | 6.88 |