6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
Major Diameter [Max: | 45.0 LB |
Minor Diameter [Min: | Flange Mount |
Major Diameter [Min: | Right Hand (CW) |
Port Size: | 2520VQ21A8-1DD20 |
Shaft Key: | 2.5 |
Mounting Flange: | Flange |
Controlled Flow Rate: | 3/16 in |
Pilot Type: | Standard Pilot |
PDF |
|
Product Details
Major Diameter [Max | 45.0 LB |
Minor Diameter [Min | Flange Mount |
Major Diameter [Min | Right Hand (CW) |
Port Size | 2520VQ21A8-1DD20 |
Shaft Key | 2.5 |
Mounting Flange | Flange |
Controlled Flow Rate | 3/16 in |
Pilot Type | Standard Pilot |
Port Type | 0.875 in |
Minor Diameter [Max | Straight w/ Key |
Shaft Type | 2520VQ |
Shaft Dia. | 1 15/16 in |
Rotation | Double |
Shaft End RPM [Max | Buna-N |
Cover End Flow @ RPM | 2500 |
Shaft Length | N/A |
Spline Description | SAE B, 2 Bolt |
Mounting | Single Shaft Seal |
Model No. | N/A |
Minor Diameter | 2700 |
Max. RPM [Max | 2500 |
Shaft Seal Type | N/A |
Weight | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Cover End RPM [Max | N/A |
Pump Series | N/A |
Relief Valve Setting | N/A |
Seal Material | N/A |
Shaft End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Manufacturer Part No. | 2520VQ21A8-1DD20 |
Cover End Pressure [Max | 3000 |
Shaft End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 12 |
GPM @ 1,800 rpm, Shaft End | 31.5 |
Integral Valve Configuration | w/o Integral Valves |
Port Orientation - Cover End | Outlet 135° CW from Inlet |
Port Orientation - Shaft End | Outlet 90° CW from Inlet |
Pressure Port Size, Cover End | 3/4 in Flange |
Pressure Port Size, Shaft End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 1.7 |
Displacement Shaft End (cu in/revolution) | 4.1 |