Excavator PC40 Hydraulic Oil Gear Pumps 705-41-01920
Cover End Flow @ RPM: | 45.0 LB |
Pressure Port Size, Shaft End: | Flange Mount |
Port Orientation - Cover End: | Right Hand (CW) |
Pump Series: | 2520VQ17A8-11DD20 |
Shaft Length: | 2 1/2 |
Minor Diameter [Max: | Flange |
Shaft Dia.: | N/A |
Rotation: | Standard Pilot |
PDF |
|
Product Details
Cover End Flow @ RPM | 45.0 LB |
Pressure Port Size, Shaft End | Flange Mount |
Port Orientation - Cover End | Right Hand (CW) |
Pump Series | 2520VQ17A8-11DD20 |
Shaft Length | 2 1/2 |
Minor Diameter [Max | Flange |
Shaft Dia. | N/A |
Rotation | Standard Pilot |
Pressure Port Size, Cover End | 0.875 in |
Model No. | 13 Tooth Splined |
Port Orientation - Shaft End | 2520VQ |
Mounting | 1 3/8 in |
Shaft Type | Buna-N |
Manufacturer Part No. | 2500 |
Displacement Cover End (cu in/revolution) | 0.715 in |
Controlled Flow Rate | SAE B, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Shaft End RPM [Max | 16/32 |
Major Diameter [Max | 2700 |
Mounting Flange | 2500 |
Port Size | N/A |
Shaft End Flow @ RPM | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Minor Diameter [Min | 0.873 in |
Weight | 0.872 in |
Shaft End Pressure [Max | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Cover End RPM [Max | N/A |
Max. RPM [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft Key | 2520VQ17A8-11DD20 |
GPM @ 1,800 rpm, Shaft End | 3000 |
Major Diameter [Min | 3000 |
Pilot Type | 12 |
Shaft Seal Type | 25.5 |
Port Type | w/o Integral Valves |
Spline Description | Outlet 135° CW from Inlet |
Integral Valve Configuration | Outlet 90° CW from Inlet |
Cover End Pressure [Max | 3/4 in Flange |
Displacement Shaft End (cu in/revolution) | 1 in Flange |
Minor Diameter | 1.67 |
Seal Material | 3.37 |