D155A1 Bulldozer S6D155 diesel engine cooling water pump 6124-61-1004
Shaft End Flow @ RPM: | 76.0 LB |
Port Orientation - Cover End: | Flange Mount |
Shaft End RPM [Max: | Left Hand (CCW) |
Shaft Length: | 3525VQ38A21-11AA20-LH |
Port Type: | 3 |
Relief Valve Setting: | Flange |
Mounting: | N/A |
Displacement Cover End (cu in/revolution): | Standard Pilot |
PDF |
|
Product Details
Shaft End Flow @ RPM | 76.0 LB |
Port Orientation - Cover End | Flange Mount |
Shaft End RPM [Max | Left Hand (CCW) |
Shaft Length | 3525VQ38A21-11AA20-LH |
Port Type | 3 |
Relief Valve Setting | Flange |
Mounting | N/A |
Displacement Cover End (cu in/revolution) | Standard Pilot |
Major Diameter [Max | 1.25 in |
Minor Diameter [Min | 14 Tooth Splined |
Controlled Flow Rate | 3525VQ |
Shaft Key | 1.9375 in |
Port Orientation - Shaft End | Double |
Cover End RPM [Max | Buna-N |
Port Size | 2400 |
Major Diameter [Min | 1.04 in |
Manufacturer Part No. | SAE C, 2 Bolt |
Pump Series | Single Shaft Seal |
Pilot Type | 12/24 |
Pressure Port Size, Cover End | 2500 |
Displacement Shaft End (cu in/revolution) | 7.4 |
Seal Material | N/A |
GPM @ 1,800 rpm, Cover End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Max. RPM [Max | 1.248 in |
Shaft Dia. | 1.247 in |
Spline Description | N/A |
Cover End Pressure [Max | N/A |
Mounting Flange | N/A |
GPM @ 1,800 rpm, Shaft End | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Shaft Type | 3525VQ38A21-11AA20-LH |
Shaft Seal Type | 3000 |
Minor Diameter | 3000 |
Pressure Port Size, Shaft End | 31.5 |
Cover End Flow @ RPM | 57 |
Minor Diameter [Max | w/o Integral Valves |
Shaft End Pressure [Max | Outlet 135° CCW from Inlet |
Weight | Outlet Opposite Inlet |
Rotation | 1 in Flange |
Model No. | 1 1/4 in Flange |
Integral Valve Configuration | 4.1 |