| Port Size | 76.0 LB |
| Shaft Type | Flange Mount |
| Relief Valve Setting | Right Hand (CW) |
| Shaft Dia. | 3525VQ25A21-11CC20 |
| Cover End Pressure [Max | 3 |
| Rotation | Flange |
| Major Diameter [Min | N/A |
| Mounting | Standard Pilot |
| Pilot Type | 1.25 in |
| Major Diameter [Max | 14 Tooth Splined |
| Integral Valve Configuration | 3525VQ |
| Displacement Cover End (cu in/revolution) | 1.9375 in |
| Shaft End Pressure [Max | Buna-N |
| Pump Series | 2500 |
| Port Orientation - Cover End | 1.04 in |
| Minor Diameter | SAE C, 2 Bolt |
| GPM @ 1,800 rpm, Cover End | Single Shaft Seal |
| Shaft Seal Type | 12/24 |
| Shaft Key | 2500 |
| Cover End RPM [Max | 2500 |
| Minor Diameter [Min | N/A |
| Displacement Shaft End (cu in/revolution) | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | 1.248 in |
| Seal Material | 1.247 in |
| Shaft Length | N/A |
| Port Type | N/A |
| Weight | N/A |
| Minor Diameter [Max | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Shaft End | 3525VQ25A21-11CC20 |
| Shaft End Flow @ RPM | 3000 |
| Spline Description | 3000 |
| Port Orientation - Shaft End | 31.5 |
| Max. RPM [Max | 37.5 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Pressure Port Size, Shaft End | Outlet 45° CW from Inlet |
| Mounting Flange | Outlet Inline w/Inlet |
| Model No. | 1 in Flange |
| Cover End Flow @ RPM | 1 1/4 in Flange |
| Controlled Flow Rate | 4.12 |
| Shaft End RPM [Max | 4.98 |
